NEW 2025 WILLIS SE 26120

2025 WILLIS Model SE 26120 Engine Lathe, In stock, 26” swing x 120” center distance
 15HP main spindle motor
 4 1/8” spindle bore, A2-8 spindle nose
 12 speeds (20-1200 RPM)
 Hardened and ground bed ways, and hardened headstock gears and shafts Automatic and manual lubrication to bed ways and slide ways
 Feed rod overload clutch
 110V controls with no volt release and emergency stop
 Gap bed
 Inch / metric dual dials
 Totally enclosed universal gearbox
 12” capacity steady rest with roller jaws
 Foot brake
 Flood coolant
 2 speed tailstock quill
 Automatic bed stops
 4-way tool post,
 2 centers, instruction and parts manual, service tools
We are very proud and excited to be starting our 60th year in business!
One of our main focuses we’ve encouraged and promoted since our founding is continually developing deep, personal, and long-term relationships with our customers, vendors, and support companies. This helps create a level of trust and understanding that when developed can’t be beat when compared to new constantly changing relationships. We still have very successful partnerships with the Swedish Solberga company since our beginning, and the German Alzmetall company for more than 50 years. Unfortunately, we have outlasted a few of our long-time original partners including the Italian Bergonzi and the Swedish SCA companies. Additionally, most all of our Taiwan partner relationships are more than 25 years old with a number of them over 30. We truly have multi-generational relationships with customers and vendors alike.

Swing over bed 26”
Swing over crosslide 17”
Swing in the gap 37”
Center height 13”
Headstock spindle taper #5MT
Headstock spindle bore 4 1/8”
Width of bed 15”
Gap length in front of faceplate 12”
Crosslide travel 14 1/2”
Compound travel 9”
Tailstock quill travel 7”
Tailstock quill taper #5MT
Tailstock quill diameter 3”
Inch threads 2 - 28 TPI
Metric threads (39) 0.8 - 14mm
Longitudinal feeds (in/rev) 0.002 - 0.028
Cross feeds (in/rev) 0.001 - 0.014

 15HP main spindle motor
 4 1/8” spindle bore, A2-8 spindle nose
 12 speeds (20-1200 RPM)
 Hardened and ground bed ways, and hardened headstock gears and shafts
 Automatic and manual lubrication to bed ways and slide ways
 Feed rod overload clutch
 110V controls with no volt release and emergency stop
 Gap bed
 Inch / metric dual dials
 Totally enclosed universal gearbox
 12” capacity steady rest with roller jaws
 Foot brake
 Flood coolant
 2 speed tailstock quill
 Automatic bed stops
 4-way tool post,
 2 centers, instruction and parts manual, service tools

OPTIONAL ACCESSORIES
Electronic infinitely variable spindle speeds, 120-day delivery $6,920
15HP spindle motor included STD
24” faceplate $1,320
Chuck guard, 20” maximum chuck capacity $420
Steady rest, 300mm capacity, (1 is standard) $1,880
Steady rest, 400mm capacity $2,020
Follow rest $930
Full length rear splashguard $1,990
Traveling rear splashguard $770
Longitudinal rapid traverse included STD
Taper turning attachment $2,940
Aloris DA quick change tool post w/ 4 holders $2,140
Bison Live Center 5MT $400
Newall Digital Readouts $6,360
4” bore, A2-8 chucks listed below, Bison Brand
3 jaw, 12” Set- Tru lathe chuck, w/ 12” A2-8 adaptor $4,420
3 jaw, 16” steel body lathe chuck, A2-8 $8,530
3 jaw, 16” semi-steel body lathe chuck, A2-8 $7,295
3 jaw, 20 steel body” lathe chuck, A2-8 $15,280
4 jaw, 16” lathe chuck, semi-steel, A2-8, solid jaws $4,230
4 jaw, 16” lathe chuck, forged steel, A2-8, 2 piece jaws $5,350
4 jaw, 16” lathe chuck, forged steel, A2-8, 2 piece jaws, oil country $11,030
4 jaw, 20” lathe chuck, semi-steel, solid jaw, flat back -
needs A2-8adaptor $5,930
4 jaw, 20” lathe chuck, forged steel, A2-8, 2 piece jaws $7,940
4 jaw, 20" lathe chuck, forged steel,A2-8, 2 pieces $10,010
Alternative Brand and Type Chucks POR