AI search could not be completed. Please try again or adjust your search.
Used Vertical Machining Center, 25 hp, 8,000 RPM, 3-axis with FANUC i CNC, CT40 taper, and 30 ATC. Equipped with thru spindle coolant, Renishaw receiver, and more. Cutting area of 40"x21.2"x20.1", supports up to 1764 lbs.
| X | 40" | 1,016 mm |
| Y | 21.2" | 538.48 mm |
| Z | 20.1" | 510.54 mm |
| Power | 25 hp | 18.6 kW |
| RPM | 8,000 RPM | 8,000 RPM |
| # ATC | 30 | 30 |
| Taper | CT40 | CT40 |
| Table-W | 21.2" | 538.48 mm |
| Table-L | 47.2" | 1,198.9 mm |
| # Axis | 3 | 3 |
| Control | CNC (Fanuc) | CNC (Fanuc) |
| Dimensions | 116″ x 96″ x 107″ High | 116″ x 96″ x 107″ High |
| Weight | 14,330 Lbs | 14,330 Lbs |
CUTTING FEED RATE 590 IPM
RAPID TRAVERSE X 1,417 in/min.
RAPID TRAVERSE Y 1,417 in/sec.
RAPID TRAVERSE Z 1,181 in/min.
DISTANCE FROM SPINDLE TO COLUMN 5.9″ – 26"
CUT HOURS 4,127 hr.
MAX. TABLE LOAD 1764 Lbs
FANUC i CNC Control
Thru Spindle Coolant
Renishaw Receiver Installed
USB Drive
PCMCIA Card Slot & RS-232 Port
MPG Hand Wheel Control
Automatic Lubrication System
Rigid Tapping
Coolant System
Spindle Chiller Unit
Levelling Pads
LNS Chip Conveyor
