| Angle (L1) | 3" | 76.2 mm |
| Angle (L2) | 3" | 76.2 mm |
| Angle (T) | 0.375" | 9.525 mm |
Material: Mild Steel
Angle Bending:
Leg out: 3" × 3" × 0.375"
Minimum inside diameter: 30"
Leg in: 2.5" × 2.5" × 0.375"
Minimum outside diameter: 36"
Flat Bar Bending:
On flat: 5" × 1" to 24" inside diameter minimum
On edge: 3" × 0.625" to 36" inside diameter minimum
Roll Diameter: 11"
Roll Speed: Minimum 30 F.P.M. (feet per minute)
Motor: Minimum 10 HP
