USED 2011 Tsugami S206 New:2011

0.75" Dia. Tsugami S206 New:2011 CNC SWISS TYPE LATHE, Fanuc 32i-B

TSUGAMI S206 CNC SWISS TYPE LATHE

NEW: 2011

VIDEO LINK: https://youtu.be/5qGii_W19_A?si=i9fsk2hYmBOnj6pQ

General Specifications from Brochure:

Control: Fanuc 31iTB

No. of Controllable Axes: 8

(X1, Z1, Y1, X2, Y2, Z2, C1, C2)

Max Bar Diameter: 20mm (3/4")

Max Machining Length: 210mm (Direct Drive Rotary GB)

250 (Static Guide Bushing)

80mm (Carrier Type Rotary GB)

45mm Bushingless

Max Drilling Diameter: 10mm

Max Tapping Diameter: M8

Deep Hole Drilling Diameter: 8mm

Max Back Spindle Chucking diameter: 20mm

Max Back Spindle Drilling Diameter: 8mm

Max Back Spindle Tapping Diameter: M6

Max Tool Spindle Drilling Diameter: 6mm (front tool post/back tool post)

8mm (rear tool post)

Max Tool Spindle Slotting Diam: 30mm (T1)

Main Spindle Speed: 200 - 12000 rpm

Back Spindle Speed: 200 - 12000 rpm

Rotary Guide Bushing: 200 - 8000 (carrier type)

200 - 12000 (direct drive type)

Tool Spindle Speed: 200 - 8000 rpm

Tool Storage Capacity (std/max): 24 pcs / 35 pcs

Tool Size: 12 x 12 x 100 mm

Rapid Traverse rate: 32 m/min

(X1, Y1: 24 m/min)

(Y2: 15 m/min)

Main Spindle: 2.2 / 3.7 kW

Back Spindle: 1.5 / 2.2 kW

Tool Spindle: 0.75 / 1.1 kW (Front tool post)

1.0 kw (rear tool post)

X1-X2-Z1-Z2-Y2 Axes 0.5 kw

Y1 axis: 0.75 kW

Lubricating Pump: 3 W

Power Source Requirements: 14.3 kVA

Compressed Air Requirement: 0.4 MPa or above

Air Discharge rate: 40 NL/min

Machine Weight (approx): 3200 kg (7055 lbs)

Machine Dimensions (approx): 2110 x 1200 x 1885 mm (83" x 47" x 74")

EQUIPPED WITH:

 - FANUC Series 32i-B CNC Control

 - Edge Minuteman 320SE Magazine Barfeed

 - MP High Pressure Coolant

FOR MORE INFORMATION: Call Mike at 973-497-7540