LEADERMAC523C Short Stock Moulder with Feedmac 08 Random Length Feeder Machine InformationCookie and Privacy Settings

LEADERMAC523C Short Stock Moulder with Feedmac 08 Random Length Feeder
523C Short Stock Moulder with Feedmac 08 Random Length Feeder
Machine Information
FEATURES
Short pieces are fed into a spin table that singulates the pieces onto a belt feeder.
The pieces are advanced to a short stock feeder at the edge of the moulder ensuring pieces are advanced butt to butt, allowing down to 4” long pieces to be fed through the machine.  With a grooved bed, and extra hold down/hold over pressure throughout the machine, the pieces can be advanced through the moulder successfully.
Specifications
Min. working width:
20 mm / 3/4”
Max. working width:
230 mm/ 9”
Min. working thickness:
10 mm / .4” (thinner on request)
Max. working thickness:
150 mm / 5.9”
Min. length of workpiece
when feeded consecutively:
100 mm / 4”
Min. length of single work piece:
800 mm / 31.4”
1st bottom spindle:
7.5 HP – 20 HP
2nd right spindle:
7.5 HP – 15 HP
3rd left spindle:
7.5 HP – 15 HP
4th top spindle:
10 HP – 25 HP
5th last bottom spindle:
10 HP –  25 HP
Up & down motor:
3/4 HP x 1
Feed motor:
5 HP / inverter x 1
Spindle diameter:
40 mm / 1-13/16 / 1-1/2
Spindle RPM:
6,000 RPM (7,200 optional)
Feed speed
6 – 24 m/min /  20 – 80 FPM
Short pieces are fed into a spin table that singulates the pieces onto a belt feeder.
The pieces are advanced to a short stock feeder at the edge of the moulder ensuring pieces are advanced butt to butt, allowing down to
4” long pieces
to be fed through the machine.  With a grooved bed, and extra hold down/hold over pressure throughout the machine, the pieces can be advanced through the moulder successfully.

(note: pieces cannot be square)