Sand two grits in a single pass with a 37×2 Double Drum Sander. Featuring INTELLISAND Technology and a 5 HP 220 Volt 1 phase motor, you can significantly reduce the amount of time you spend sanding. The 37×2 Double Drum Sander features INTELLISAND Technology that auto-regulates the conveyor based on load, preventing burning, gouging, and damaging stock. The machine comes standard on an open-column base, and features a 5 HP motor. Available in Single phase only. Features: INTELLISAND Technology: Automatically adjusts conveyor speed based on load Prevents gouging, damaging or burning stock Provides consistent finish even with varying grain pattern and density Greatly increases abrasive planing and dimensioning speed Sanding Capacity Maximum Width (in): 37″ Minimum Length (in): 3-½″ Maxiumum Thickness (in): 12″ Minimum Thickness (in): 1/32″ Dimensions (H x W x D): 43″ x 58″ x 31″ Drum (Extruded Aluminum): 5″ x 37″ Drum Speed: 1740 RPM Dust Hood (Steel Hood, Hinged At Back): (3) – 4″ Vacuum ports, Min. CFM: 1000 recommended Ball Bearings (1″): 4, sealed and permanently lubricated Conveyor Motor: 100 in.-lb. torque, direct drive D.C. motor, ranged variable, 0-15 FPM Drive Motor (TEFC): 5 HP Power Requirements: 208-230V, 60Hz, 1 Phase 30 Amp Service; 3 Phase 20 Amp Service Shipping Dimensions (L x W x H): 62″ x 52″ x 45″
