The NT-CS24RT Up Cut Saw is a powerful upcut with 24″ blade and a rotary table allowing it to cut angles in product. Upcut Saws house the blade inside the cabinet of the machine and use a double action cylinder to hold and cut the product safely. The Rotary Table Machines are not hand specific so you can feed parts from the left to the right or the right to the left on the same machine. The Rotary table design allows for the operator to change to specific pinned angles such as 15, 30, 60 and 90degree cuts or anywhere in between by spinning the turret. Using a 24″ diameter blade the CS24RT has the largest cut capacity available on 90-15 degree angles. This machine comes standard with stroke speed control, emergency stop, safety switch, safety enclosure guarding and stroke adjustments for the blade and the top clamp making it ideal for wood and plastic application. The CS24RT has several available options such as two handed cycle operation, infeed/outfeed tables, chromed machine table and safety interlocked cabinet doors for restricted operator access. Cutting Envelope: 1” x 15-5/8” 2” x 15-1/4” 3” x 14-5/8” 4” x 14” 5” x 13-1/8” 6” x 12” 7” x 10-5/8” 7-3/4” x 8-3/4” 8-1/2” x 2-3/4”
MAIN MOTOR HP: 10 HP
VOLTAGE, FREQUENCY: 230/460 Volt 60Hz
PHASE: 3 Phase
AMP REQUIREMENT: 27/13.5 Amp
APPROVED ELECTRICAL PARTS: CE Approved Components
DUAL VOLTAGE MOTORS: c CE Approved Components
CONTROL VOLTAGE: 220 Volt
PASS-LINE: 39-1/2''
CUTTING ENVELOPE: 1'' x 15-5/8'' - 8-1/2'' x 2-3/4''
MAX. WORKING WIDTH: 1'' x 15-5/8''
MAX. WORKING THICKNESS: 8-1/2''
ABLE TO CUT ANGLE: 0-60 Degrees
ARBOR RPM: 2060 RPM
BLADE SIZE: 24'' Carbide Tipped
NO. OF TEETH ON BLADE: 120 Tooth
TOOTH SPACING: .602''
BLADE KERF: .154''
DUST COLLECTION REQUIREMENT: 436 CFM @ Point of Extraction
DUST PORT SIZE OUTLET: (2) 4'' Ports
ARBOR DIAMETER: 1''
HOLD DOWN STYLE: T Clamp
FLR INCLUDED: Filter, Lubricator, Regulator
CFM AIR SUPPLY REQUIREMENT: 1/4'' Line @ 90 PSI
SAFETY FEATURE: Door Safety Interlock
GUARDING: Full Enclosure
OPERATION STYLE: Manual
FENCE TYPE: Fixed with Side Movement
FENCE DIMENSIONS: (2) 4-1/4'' x 18''
ADJUSTABLE STROKE: 6-1/2'' on Stroke
FRAME CONSTRUCTION: Steel Construction
TABLE CONSTRUCTION MATERIAL: Cast Construction
DECIBEL RATING: 68 dB
NET WEIGHT: 2288 Lbs.
GROSS WEIGHT: 2550 Lbs.
MACHINE DIMENSIONS: 56'' x 54'' x 75''
PACKAGING DIMENSIONS: 62'' x 54'' x 84''
