USED 2012 OKUMA SIMULTURN LU-300MY
Overview
Description
Swing Over Bed .............................. 20.87"
Swing Over Saddle ........................... 16.14"
Distance Between Centers .................... 39.37"
Max Turning Diameter ........................ 13.39"
Max Working Length .......................... 39.37
Axis Travel:
XA............................................10.24"
ZA............................................40.00"
XB............................................ 5.51"
ZB............................................38.00"
C Axis ...................................... 360 Degree
Spindle Speeds .............................. 38 ~ 3,800 RPM
Speed Ranges .................... Infinitely Variable X Auto Range
Nose ................................. Option A2-8 Big Bore
Bore Diameter ............................... 3.14"
Turret Upper Multitasking ................... V-12 NC Turret
Lower ....................................... V8 (VDI)
Indexing Time Non-Lift ...................... 0.18 Sec
Live Tool Speeds ............................ 45 ~ 4,500 RPM
Feedrates X/Z/C ............................. 787/984/200
Tailstock Quill Diameter .................... 3.54"
Quill Bore Taper ............................ MT#5
Quill Travel ................................ 4.72"
Main Drive Motor ............... 30-HP 304 Ft-LB Torque
Live Tool Motor ............................. 9.5 HP
Machine Weight .............................. 19,360 LBS
Equipped With:
* Okuma OSP-200LA With Machining Navi L-G * Spare M-Codes, 4-Sets
Pitch Error Compensation * Feed Hold During Threading
Thread Start Point Offset *Helical Cutting * Spindle Synchronized Tapping
Variable Spindle Speed Thread
* Auto Tow-along Tailstock * LNS/AutoBlock Model SLU-Z-2 .32" To 3.98"
Lower Turret Mount, Allows For Turret Index * Hydraulic Valve Package
* Manual Touchsetter * Chuck High/Low Pressure * Losma Mist Collector
*Live Tool Package (2) Side Face Mill/Drill, (2) End Face Mill/Drill
* 10" Kitagawa 3-Jaw 40MM Bore * Enomoto Chip Coveyor & Coolant Tank
* Multi-Tap Transformer * LNS Quick Six Move S2 Barfeed System & Liners
3/8" To 3-1/8" x 74.8" Max Length, Lower Horizontal Rack
Specifications
Swing Over Bed .............................. 20.87"
Swing Over Saddle ........................... 16.14"
Distance Between Centers .................... 39.37"
Max Turning Diameter ........................ 13.39"
Max Working Length .......................... 39.37
Axis Travel:
XA............................................10.24"
ZA............................................40.00"
XB............................................ 5.51"
ZB............................................38.00"
C Axis ...................................... 360 Degree
Spindle Speeds .............................. 38 ~ 3,800 RPM
Speed Ranges .................... Infinitely Variable X Auto Range
Nose ................................. Option A2-8 Big Bore
Bore Diameter ............................... 3.14"
Turret Upper Multitasking ................... V-12 NC Turret
Lower ....................................... V8 (VDI)
Indexing Time Non-Lift ...................... 0.18 Sec
Live Tool Speeds ............................ 45 ~ 4,500 RPM
Feedrates X/Z/C ............................. 787/984/200
Tailstock Quill Diameter .................... 3.54"
Quill Bore Taper ............................ MT#5
Quill Travel ................................ 4.72"
Main Drive Motor ............... 30-HP 304 Ft-LB Torque
Live Tool Motor ............................. 9.5 HP
Machine Weight .............................. 19,360 LBS
Equipped With:
* Okuma OSP-200LA With Machining Navi L-G * Spare M-Codes, 4-Sets
Pitch Error Compensation * Feed Hold During Threading
Thread Start Point Offset *Helical Cutting * Spindle Synchronized Tapping
Variable Spindle Speed Thread
* Auto Tow-along Tailstock * LNS/AutoBlock Model SLU-Z-2 .32" To 3.98"
Lower Turret Mount, Allows For Turret Index * Hydraulic Valve Package
* Manual Touchsetter * Chuck High/Low Pressure * Losma Mist Collector
*Live Tool Package (2) Side Face Mill/Drill, (2) End Face Mill/Drill
* 10" Kitagawa 3-Jaw 40MM Bore * Enomoto Chip Coveyor & Coolant Tank
* Multi-Tap Transformer * LNS Quick Six Move S2 Barfeed System & Liners
3/8" To 3-1/8" x 74.8" Max Length, Lower Horizontal Rack