AI search could not be completed. Please try again or adjust your search.
10 Day Start Up warranty included with 10 day Return Privilege!
Must Move ASAP and Open to an Offer!!
| X | 23.6" | 599.44 mm |
| Y | 18.9" | 480.06 mm |
| Z | 14.2" | 360.68 mm |
| Power | 10 hp | 7.5 kW |
| RPM | 10,000 RPM | 10,000 RPM |
| # ATC | 14 | 14 |
| Dimensions | 62" x 72" x 92" | 62" x 72" x 92" |
| Weight | 4,000 lbs. | 4,000 lbs. |
One used BROTHER CNC Drill & Tapping Machine with 10 Day Start Up warranty and 10 day Return Privilege
Model: TC-S2A
Specifications
X:19"
Y:14"
Z:10.5"
Table: 23 5/8” x 11 ¾”
RPM: 10,000 RPM
6,000 rpm Tapping
Cat 30 taper
# ATC: 14
1.8 sec. chip to chip
Rapid travels: Z: 1,968 ipm, X & Y: 1,417 ipm
Dimensions: 62" x 72" x 92"
Weight: 4,000 lbs
EQUIPPED WITH:
Brother CNC-A00 Conversational control with a 10.4” LCD screen, Tool length compensation, tool diameter compensation, Helical interpolation, RS-232C interface, and a Manual Pulse generator
Vise
Manuals
Approximately 21 Cat 30 tool holders
Full enclosures with a Top cap to prevent chips and coolant from exiting machine
Coolant
Rigid tap
SN: 111320, New 9/1999 – Hours ON: 16,821, Run & Operation hours: 5,867
Location: In Illinois plant and under power
Best regards, Jerry Ditter, Pres.
www.ditterindustriesinc.com Serving industry since 1978
