USED LODGE & SHIPLEY POWERTURN 2516
Overview
Description
26.5" x 48" LODGE & SHIPLEY "POWERTURN 2516" ENGINE LATHE - Taper Attachment - 21" 4-Jaw Chuck - (2) Steady Rests - Power Rapid Traverse - Tool Post - 30 HP Motor
Specifications
| Swing | 26.5" | 673.1 mm |
|---|---|---|
| Centers | 48" | 1,219.2 mm |
| Spindle Bore | 2.5" | 63.5 mm |
| Power | 30 hp | 22.4 kW |
| RPM | 1,000 RPM | 1,000 RPM |
| Swing Over Cross Slide | 20" | 508 mm |
| Dimensions | 12'2" X 5'7" | 12'2" X 5'7" |
| Weight | 12000 lbs | 12000 lbs |
25"/26.5" x 48" LODGE & SHIPLEY "POWERTURN" ENGINE LATHE
Serial No 48306, Model 2516, Series "POWERTURN"
EQUIPPED WITH:
Taper Attachment
21" 4-Jaw Chuck - Power Rapid Traverse
(2) Steady Rests - Tool Post
Replaceable Hardened & Ground Bed & Cross-Slide Ways
Quick Change Gear Box and Threading Dial
Forward & Reverse Capabilities
Full Length Coolant-Chip Pan and Coolant System
CATALOG SPECIFICATIONS:
Hole Thru Spindle 2.5"
Swing Over Bed Ways, Rated 25"
Swing Over Bed Ways, Actual 26.5"
Swing Over Carriage Wings 26.5"
Swing Over Cross-Slide 20"
Distance Between Centers 48"
Cross-Slide Cross-Feed Travel 18.5"
Top-Slide Cross-Feed Travel 5.25"
Tailstock, Spindle Diameter 4"
Tailstock, Spindle Travel 11"
Tailstock, Spindle Taper #5 MT
(24) Spindle Speeds Range, Forward 18 to 1000 RPM
(16) Spindle Speeds Range, Reverse 18 to 250 RPM
(55) Carriage Longitudinal Feeds .0025 to .160 IPR
(55) Thread Changes, Range 1 to 64 TPI
Main Motor, Horsepower 30 HP
Electrical System 230-460/3/60
Floor Space Required, L x D 12'2" x 5'7"
Weight, Approximately 12000 LBS
F.O.B. OUR WAREHOUSE