Very good condition Geka Hyrocrop 110 ton ironworker, with tone of tooling and "C" channel blades as well as rod shear angle shear, flat bar shear, coper/notcher and of course punch station, two foot pedals
Boxes of tooling, Electric Stop and cut length gauge, note tooling on wood table same as tooling in green box on machine, removed to show them better and clean
| Tonnage | 110 T | 99.79 t |
| Angle (L1) | 6.5" | 165.1 mm |
| Angle (L2) | 6.5" | 165.1 mm |
| Angle (T) | 0.5" | 12.7 mm |
| Power | 12 hp | 12 hp |
| Throat | 12" | 304.8 mm |
| Stroke | 1.1" | 27.94 mm |
| Dimensions | 84" x 48" x 86" High | 84" x 48" x 86" High |
| Weight | 6,050 lbs. | 6,050 lbs. |
Force Punch 180 tons
force other 4 station 110 tons
Capacities:
Flat Shear 24" X 1/2" Mild steel
16" X 3/4"
Angle shear 6" x 6" x 1/2"
Bar shear 2" Round or square Solid
Notcher 1/2" x 2" x 3.5" deep
Punch 1.57" through 7/8" or 1.1" through 1.1"
Dual cylinder, dual operator at the same time, dual foot pedals
Loads of tooling
approx 6 boxes of punches and dies sets
dual operator, dual pedals, length guage with trigger switch
extra "C" channel blades and guards and manuals
