AI search could not be completed. Please try again or adjust your search.
| size | 4000 Watt | 4000 Watt |
| Sheet-W | 60" | 1,524 mm |
| Sheet-L | 121" | 3,073.4 mm |
| Wattage | 4000 hp | |
| X | 120.87" | 3,070.1 mm |
| Y | 61.02" | 1,549.9 mm |
| Z | 7.87" | 199.9 mm |
Amada FOM2 3015 CNC Laser (2013)
X= 121″
Y= 61″
Z= 7.87″
Maximum thickness
7/8″ mild steel
1/2″ stainless steel
3/8″ aluminum
Maximum work weight: 2000 lbs
Rapid traverse
X & Y: 3,150 inches per minute
Simultaneous: 4455 inches per minute
Z: 2, 362 inches per minute
Repeatability: +/- 0.0002″
Z-axis sensor: HS-2007
CNC: AMNC PC-OS; windows embedded
Assist gas control: Automatic select
Oscillator: AF4000iB-4000 watt
Approximate machine weight: 34,216 lb. (includes shuttle tables)
Power requirements: 200/220V +/- 10% 50/60 Hz
Used Amada (2013) laser with 79k hours. The machine has been very well maintained.
Turbo and Vacuum pump were replaced by Fanuc in July of 2024. Eight discharge tubes and O-rings replaced in May of that same year.
The price includes machine disconnect, and loading on buyers supplied truck. Additionally, Chiller, Dust Collector, Shuttle table, Beam purge, Regulators, Hoses and tubing are all included.
Experienced Laser Mechanic will be the one disconnecting the machine. Same could also install, train and service the machine at its new location.
This laser has a lot of production left in it. Replacement parts are available from either Amada or Fanuc. Used parts are inexpensive by comparison and readily available.
The body of the machine is just over 20' long and weighs 21,000 pounds. It is less than 10' wide.
