Northtech NT ES948DE‑732 9″ X 48″ Capacity Double Sided Oscillating Edge Sander

This machine features 9″ X 48″ platens and is powered by a 7.5 hp main motor. The oscillating stroke is 1/2″.

7.5HP main motor; 3PH, 230V/460V Dual Voltage
12mm (1/2″) oscillating stroke
Drive wheel: 7″ x 9-5/8″
Easy elevation control through manual worm gear
Side table dimensions: (2) 10-1/2″ x 48″
Side table tilt 0° – 45°
End table dimensions: (1) 13-3/4″ x 17-3/4″
End table tilt: 0° – 45°
Sanding belt size: 9″ x 142″ (Included)
Sanding belt speed: 3200 FPM
Platen size: (2) 10″ x 48″
Dust ports: (2) 4″ requiring 400 CFM @ points of extraction
Easy jig fences are standard for squaring accuracy and part stability
Machine Dimensions: 79″ x 29″ x 32″
Packaging Dimensions: 83″ x 34″ x 53″
Net weight: 915 lbs
Gross weight: 1,105 lbs
(1) Toolbox
Warranty is one-year parts
All machines are tested stateside prior to shipment providing trouble-free start-up.
Direct Drive = Motor to 7” x 9-5/8” Pulley
Machine Hp. = 7.5 hp.
Voltage/ Freq. = 230 Volt 60Hz
Phase = 3 Phase
Amp Requirement = 22 Amps
Elevation Sys. = (2) Post Jack Screw
Elevation Style = Manual Wheel Adjustment
Total Hp. = 7.5 Hp.
Electronics = CE Approved Components
Dual Voltage = 230/460 Volt
Control Voltage = 24 Volt Control Voltage
Pass-Line = 32”
Max. Length = 48”
Max. Thickness = 9”
Sandpaper Size = 9” x 142”
Platen Specs. = 9” x 48”
1st Belt Speed = 3300 FPM
Oscillation Sty = Gear Box with Cam
Oscillation Rte = 30 Cycles/Minute
Oscillation Trv = 3/8”
Tracking Style = Manual Adjustment
Tension Style = Manual Adjustment
Vertical Travel = 5-3/4” Table Adjustment
Dust Collection = (2) 4” @ 900 CFM
Emergency Stop = Push Button
Guarding = High Visibility Guarding
Fence Type = Jig Fence
Tiltable = 45 Degrees
Frame Const. = 1/4” Steel Construction
End Table Dims. = 13-3/4” x 17-3/4”
Worktable Dims. = 10-1/2” x 59-1/2”
Table Const. = Steel
Decible Rating = 72 dB
Net Weight = 910 Lbs.
Gross Weight = 1104 Lbs.
Machine Dims. = 79” x 29” x 32”
Packaging Dims = 82” x 34” x 53”
Direct Drive = Motor to 7” x 9-5/8” Pulley
Machine Hp. = 7.5 hp.
Voltage/ Freq. = 230 Volt 60Hz
Phase = 3 Phase
Amp Requirement = 22 Amps
Elevation Sys. = (2) Post Jack Screw
Elevation Style = Manual Wheel Adjustment
Total Hp. = 7.5 Hp.
Electronics = CE Approved Components
Dual Voltage = 230/460 Volt
Control Voltage = 24 Volt Control Voltage
Pass-Line = 32”
Max. Length = 48”
Max. Thickness = 9”
Sandpaper Size = 9” x 142”
Platen Specs. = 9” x 48”
1st Belt Speed = 3300 FPM
Oscillation Sty = Gear Box with Cam
Oscillation Rte = 30 Cycles/Minute
Oscillation Trv = 3/8”
Tracking Style = Manual Adjustment
Tension Style = Manual Adjustment
Vertical Travel = 5-3/4” Table Adjustment
Dust Collection = (2) 4” @ 900 CFM
Emergency Stop = Push Button
Guarding = High Visibility Guarding
Fence Type = Jig Fence
Tiltable = 45 Degrees
Frame Const. = 1/4” Steel Construction
End Table Dims. = 13-3/4” x 17-3/4”
Worktable Dims. = 10-1/2” x 59-1/2”
Table Const. = Steel
Decible Rating = 72 dB
Net Weight = 910 Lbs.
Gross Weight = 1104 Lbs.
Machine Dims. = 79” x 29” x 32”
Packaging Dims = 82” x 34” x 53”