Northtech NT CS20L-1032 20″ 10HP Upcut Saw (Left-Hand Cut) 230V

This innovative up-cut saw from Northtech quickly and safely cut boards up to 15-1/2 inches wide or 5-3/4 inches high. The powerful 10 HP soft-start motor and 20″ diameter blade reliably produce clean and consistent results. Up to 16′ infeed/outfeed tables with flip-stops are optionally available to further improve operator speed and accuracy.
*Be sure to ask us about the newly-available “UCS” up-cut saw models, which offer advanced features such as extra dust collection and a full zero-clearance fence to help eliminate tear-out!

10HP motor, 3PH 230V with 24V magnetic controls
20” Tungsten Carbide tipped blade included
1” Saw arbor diameter
Cycle operation: Pneumatic
Quick access on the front of the machine to adjust blade stroke.
Safety interlock for blade access
Table size: 20” x 26”
2700 RPM
Net / Gross weight: 788 lbs. / 874 lbs.
Packing dimensions: (L) 30″ x (W) 35″ x (H) 51″
(1) Toolbox and manual
Warranty is one-year parts
All machines are tested stateside prior to shipment providing trouble-free startup.
Cut capacity with Factory Fence: 1’’ x 14.5’’, 2’’ x 14’’, 3’’ x 13’’, 4’’ x 12’’, 5’’ x 11’’
Cut capacity without Factory Fence: 1’’ x 15.5’’, 2’’ x 15-1/8’’, 3’’ x 14-3/8’’, 4’’ x 13.5’’, 5-3/4’’ x 9-1/2’’
Main Motor Hp. = 10 hp.
Voltage/ Freq. = 230 Volt 60Hz
Phase = 3 Phase
Amp Requirement = 24.6 Amps
Electronics = UL Approved Components
Dual Voltage = 230/460 Volt
Control Voltage = 24 Volt Control Voltage
Pass-Line = 36”
Cut Envelope = 1” x 15-1/2”, 5-3/4” x 9-1/2″
Max. Width = 17-1/4”
Max. Thickness = 5-7/8”
Arbor Rpm = 2700 Rpm
Blade Size = 20” Tungsten Carbide Tipped
No. of Teeth = 120 Tooth
Tooth Spacing = 1/2”
Blade Kerf = .141”
Dust Collection = (1) 4” @ 450 CFM
Arbor Diameter = 1” Arbor
Cycles/Minute = 40 Cuts Per Minute
Hold Down Style = T Clamp
FLR Included = Filter, Lubricator, Regulator
Recommended CFM = 3/8” Supply Line @ 90 Psi
Emergency Stop = Push Button
Safety Feature = Safety Interlock Switch
Guarding = High Visibility Guarding
Operation Style = Pneumatic Foot Pedal
Fence Type = Adjustable Fence
Fence Dims. = 2″ x 25”
Worktable Dims. = 21-1/2” x 67”
Table Const. = Cast Iron
Decible Rating = 75 dB
Net Weight = 788 Lbs.
Gross Weight = 874 Lbs.
Machine Dims. = 42” x 34” x 54-1/2”
Packaging Dims = 35” x 30” x 51”