Dake SE 5X6 RCT Benchtop Horizontal Bandsaw – 983107-1

This semi-automatic benchtop horizontal bandsaw is small in size but not in power. Featuring new reverse cutting technology for cooler cutting and faster, cleaner cuts. Designed for on-the-go applications this saw will cut all of the metal rounds, flats, and tubes you need right in the field. Offering 110V power, 2.5 HP motor with variable cutting speeds, 2 cutting modes, and mitering capabilities of 0°-45°.
5″ x 6″ Benchtop/Portable, Semi-Auto Horizontal Bandsaw, w/Reverse Cutting Tech., 110 Volt
This semi-automatic benchtop horizontal bandsaw is small in size but not in power. Featuring new reverse cutting technology for cooler cutting and faster, cleaner cuts. Designed for on-the-go applications this saw will cut all of the metal rounds, flats, and tubes you need right in the field. Offering 110V power, 2.5 HP motor with variable cutting speeds, 2 cutting modes, and mitering capabilities of 0°-45°.
5″ x 6″ Benchtop/Portable, Semi-Auto Horizontal Bandsaw, w/Reverse Cutting Tech., 110 Volt

Gravity down feed for hands free cutting
Electronic speed regulator with “Constant Speed” feature prevents “bog” downs
End of cut shut off switch with trigger control, e-stop and blade cover interlock
Hefty 2.5 HP motor with direct drive
RCT “reverse cutting technology”. Blade runs in reverse direction for cooler cutting, faster and cleaner cuts
Bi-Metal Blade
Blade tension indicator with clutch for proper blade tensioning every time
Push and click hands free cutting pressure setting
Variable Speeds with 114 – 262 feet per minute
Cast bed and cutting bow and outboard stop
Miter capabilities 0°- 45°
Quick release vise for fast set up and change over
2 cutting modes. Manual and gravity down feed
Cutting speeds and feed guide