USED DOALL 2013-V3

This versatile machine can perform straight, angular, curved cuts, and intricate contours. It cuts aluminum, brass, copper, mild steel, tool steel, stainless steel, sheet metal, and nonmetals like plastics, paper, and fibrous material. With a 3 HP motor, this prototype offers enhanced cutting power for more demanding applications.

Details:
Column Mounted Controls-Column mounted controls give the operator easy access to band start and blade speed insuring their hands are away from the blade at band start.
Variable Frequency Band Drive-Band drive is comprised of a electric variable frequency drive controlled motor transferring power thru our time honored, gear driven, 2 speed transmission giving maximum torque to the tooth tips of the sawblade reducing band stall and tooth strippage.
Post Elevating Handwheel-Easy to operate post elevating handwheel allows the operator to keep the upper saw guide block as close to the top of the material being cut without getting their hands close to the blade during adjustment. Proper positioning minimizes the possibility of band deflection increasing band life and safety.
Bandwheels-Cast aluminum, crowned bandwheels, are supplied with rubber tires to minimize wheel wear and insure proper band tracking. The tires allow for minimum damage to the set of your saw band.
Manual Band Tension-Proper blade tension is manually set to a factory installed indicator which covers all widths of saw bands. This indicator will prevent the possibility of over/under tightening of the sawband for maximum cutting rates and extended band life.
Wheel Brush-A strategically mounted replaceable nylon wheel brush cleans the surface of the lower wheel minimizing damage to the lower wheel tire by reducing any chip buildup which may cause improper blade tracking.
Saw Guide-Machine is equipped with one set of DoALL invented chevron type saw guide blocks and inserts which will handle 1/8-1/2” sawbands. These will allow proper support to the side and back of the band minimizing deflection due to overfeed conditions.
Safety Systems-A unique transmission lock out system prevents shifting between high and low speed while the band is running. Preventing gear stripping and shiftfork damage. Band door interlocks prevents the starting of the saw band while the doors are open. They will also stop the band drive if the doors open during operation which protects the operator from being exposed to a moving band.
10 year manufacturer’s warranty available (DoALL Cut Above Warranty).
Specs:
Saw Blade:

Band Width Capacities: 1/8" to 1"
Blade Length: 154"
Band Drive:

Motor HP-3 Hp
Band Speed- Low range 30-320 fpm
Band Speed- High range 550-5500 fpm
Band Tension:

Manual
Coolant System:

Flood-No
Mist Lubricator-Optional
Floor Space Dimensions:

W x L X H -56" x 44" x 80"
Material Pass Height -39"
Machine Weight- 1,250 lbs.
Electrical:

Voltage Requirement- 208V, 230V or 460V-60Hz-3ph
Wye configuration (Must Specify at Order Placement)
Total Amp Draw:

(FLA) 10.7(208) 10.7(230) 5.3(460)Amps