USED AGILENT TECHNOLOGIES G1103A

This is a used Agilent 8453 UV-Visible Spectrophotometer. Tested working.
The Agilent 8453 spectrophotometer is a single-beam, microprocessor-controlled, UV-visible spectrophotometer with collimating optics. With its diode-array technology, the spectrophotometer is much faster than comparable conventional instruments—with more precision, more sensitivity and more reproducible results.
Specifications: 
Wavelength Range: 190–1100 nm
Slit Width: 1 nm
EP Resolution Test: > 1.6 toluene in hexane, ratio abs. at 269 nm/266 nm
Stray Light:

< 0.03 % at 340 nm (NaNO2, ASTM)
< 0.05 % at 220 nm (NaI, ASTM)
< 1 % at 198 nm (KCl, EP)
Wavelength Accuracy:

< ± 0.5 nm 0.5-second scan (NIST 2034)
< ± 0.2 nm at 486.0 and 656.1 nm
Wavelength Reproducibility: < ± 0.02 nm ten consecutive scans (NIST 2034)
Photometric Accuracy:

< ± 0.005 A at 440.0, 465.0, 546.1, 590.0, and 635.0 nm, 1 A (NIST 930e)
< ± 0.01 A at 235, 257, 313, 350, 430 nm (potassium dichromate, EP method)
Photometric Noise: < 0.0002 A sixty 0.5-second scans at 0 A, 500 nm, rms
Photometric Stability: < 0.001 A/h at 0 A, 340 nm, after 1-hour warm-up, measured over 1 hour, every 5 seconds, constant ambient temp.
Baseline Flatness: < 0.001 A 0.5-second blank, 0.5-second scan, rms
Typical Scan Time: 1.5 seconds full range
Shortest Scan Time: 0.1 seconds full range
Time Until Next Scan: 0.1 seconds full range, 0.1-second scan, up to 150 consecutive scans
Financing Available
Includes:
Agilent 8453 UV-Visible Spectrophotometer
Single cell
Data System ( PC, Monitor, cables)
Options:
Installation and familiarization
Extended Warranty
Multicell available upon request