NEW 2026 REM SCR 44 2SF VTL

REM Vertical Turning and Milling Center SCR 44 2SF – C axis, 6axis, 2 Rams, FANUC CNC
This is an advanced Vertical Turning machine, set up to perform Turning operations as well as milling, drilling, grinding operations(by electro spindle).
The two rams of the machine can perform different operations at the same time. As a result, this machine can perform complex machining in very short times.
The vertical lathe SCR 44 2SF is of the highest quality structure with heavily ribbed construction for superior rigidity, strength, and dimensional stability with enhanced wear characteristics, designed to perform turning, milling, drilling, and threading, for both roughing and finishing operations.
The main operations that can be executed on the machine are:
 Turning:
o internal and external longitudinal turning
o hard turning
o internal and external facing;
o internal and external profiling;
o plunging;
o internal and external grooving;
o face grooving;
o internal and external undercutting
o boring;
 Milling
o face milling;
o shoulder milling;
o profile milling;
o slot milling;
o boring;
o thread;
 Drilling
 Grinding (by Omlat electro spindle)- extraprice

Our machines power some of the most demanding industries—aerospace, energy, forging, and heavy manufacturing. Whether you’re looking for new equipment, modernization services, or complete factory relocations, REM delivers fast, reliable solutions with European craftsmanship.
Our services include:
High-performance machine tool manufacturing
Machine retrofitting & modernizations
Industrial relocation & installation services

Faceplate Diameter 4000 mm
Machining Diameter: 4400 mm
Swing diameter 4400 mm
Machining Heights under cross rail/tools 2.000 / 1.800 mm
Work Piece Weight 18,000 kg
Nominal Turning Travels
X & U - Axis Ram Carriage (right side RAM)
From -100 mm
To 2.250 mm + ATC travel
Z and W - Axis Ram (left side RAM) 1300 mm
Work Table
Work Table Diameter 4000 mm
Normal face plate with T-slots
Work Table Speed:
-for machining 1 - 50 rpm
Power Continuous S1 Siemens 95 kW
Torque Continuous S1 110,000 Nm
Turning main drive mechanism ZF Gear box reducer and belt transmission
C axis drive (Table)
Work Table Milling Speed 0.02 to 1.5 RPM
Milling Torque Continuous S1 60,000 Nm
Z & U - Axis Ram
Turning Ram
RAM Size 250 by 250 mm
Tool shank size: - KM 63 For both rams / automated tool clamping
Milling Ram – Live spindle (milling & drilling operations)
Ram Speed 0 to 3.000 rpm
Power Continuous S1 37 kW
Torque Continuous S1 1.400 Nm
Driving mechanism
ZF gearbox, two stages, belt transmission
ZF gearbox and main spindle bearing sets are supplied
with coolant systems, individually for each.
Tool taper HSK 100A for both rams / automated tool clamping
Tool Storage
Number Of Tool Magazines
Magazine type
two ATC for 12 turning, milling/drilling and probe,
right and left side of the machine
Disk type, vertical, placed on the floor
served by a Fanuc robot provided with double gripper
system
Tool Storage 12 + 12
ATC turning capabilities:
Maximum Singular Tool Weight – turning toolholder
Maximum Singular Tool Weight – milling/drilling
toolholder
Total Tool Weight:
Maximum tool size – turning
Maximum tool size – milling
Maximum tool size - drilling
Maximum length
50 kg
25 kg
600 kg
250 x 150 mm
Dia. 300 mm
Dia. 110 mm
700 mm
Axes Drives
X and U - Axes Ram Carriage
Power Continuous S1 5.5 kW
Thrust Continuous S1 40,000 N
Z-Axis RAM
Power Continuous S1 5.5 kW
Thrust Continuous S1 40,000 N
Power Continuous S1 11 kW
Axes Rates
X, U And Z, W-Axes Feed Rates 0.02 to 6,000 mm/min
X, U And Z, W-Axes Rapid Rates 8,000 mm/min
Coolant System
Coolant Tank Capacity 2.000 L
Coolant Pressure / Flow Rate:
-internal coolant (turning)
-internal coolant (milling) / pressure adjustments steps
-internal coolant (drilling) / pressure adjustments steps
Filtration unit: - type
6 bars at 100 LPM
40 bars at 60 LPM
40 bars at 60 LPM
Cartridge type
Chip conveyor
Conveyor type Belt type two pieces
Width The conveyors at the sides have a width of 400 mm and a
pitch of 4”.
CNC Control
- type
- producer
Sinumerik 840 Dsl
Siemens
Operator panel Swingable type on the front of the machine.
The cable carrier system will be protected against thechips and liquid

Measuring systems
Producer/brand Heidenhain
Type Absolute, capsuled with sealing air
Technical details
Linear scales – for X,U,Z and W axes
Angular encoder – C axis
LS 495S
Scale type DIADUR glasses
Accuracy grade +/- 0.003 mm
Measuring step – 0.001 micron
RON 886
Accuracy grade +/- 1’’
Positioning error signal ≤ 0.035’’
Accuracy
Positioning:
X and U axes
Z and W axes
C axis
Repeatability:
X and U axes
Z and W axes
C axis
±0.010 mm / m
±0.010 mm /m
±3 arcsec
0.020 mm
0.020 mm
6 arcsec
Overall dimensions
Length x Width x Height 9.000 x 7.000 x 7,300 mm
Weight 95.000 kg
Minimum Fused Disconnect 185 KVA
Machine enclosure
Enclosure type Complete machine enclosure, according with the CE norms.
The enclosure ensures most of the chips to be directly
deposed to the chip conveyor during the process. The part
loading should be possible with an overhead crane. The
enclosure should be made in way to enable an easy access
for the maintenance.
Cutting conditions

SC RETROFIT ECHIPARI SI MENTENANTA SRL

Turning conditions
Cutting conditions soft turning ( rough turning)
cutting depth
federate
cutting speed
estimated cutting power per RAM
estimated cutting torque per RAM
estimated cutting force
Cutting conditions hard turning ( hard turning )
cutting depth
federate
cutting speed
ap = 15 mm
f= 1,0 mm/U
vc = 80 - 140 m/min
87 KW (cross check by supplier!)
115 kNm (cross check by supplier!)
38 kN (cross check by supplier!)
ap = 0,1 - 0,8 mm
f= 0,15 – 0,5 mm/Rev
"v c = 130 - 240 m/mi