NEW CSS Antenna X7CAP-FRO-124-00-N

CSS Antenna X7CAP-FRO-124-00-N Dual Band Xpol, 24° H-Beams NEW (6986) R In great cosmetic condition. See pictures for more detail. Manufacturer:CSS Antenna Model #: X7CAP-FRO-124-00-N Model: Dual Band Xpol, 24 H-Beams Frequency 698-824/824-896/1710-1850/1850-1910/1910-2170 MHz Polarization: +/- 45º Gain: 12.2 dBi/ 12.5 dBi/ 12.5 dBi/ 12.6 dBi/ 13.0 dBi Horizontal Beam (3dB pts): 27º/24º/27º/25º/23º Vertical Beam (3dB pts): 70º/65º/65º/63º/58º Front-to-Back (Copolar): 27dB/ 27dB/ 30dB/ 30dB/ 30dB Sidelobe Suppression for 1st lobe above main beam: 16dB/ 16dB/ 18dB/ 18dB/ 16dB Electrical Downtilt: 0º VSWR / Return Loss: 1.70:1/11.7 dB Impedance: 50 Ohms Max. Power Per Connector: 250 CW at 800 MHz / 125 CW at 1900 MHz Isolation between ports: <-25dB Intermodulation (2x20W): <150dBc Input Connector (female): Type N or 7/16 DIN Dimensions (LxWxD) 13.9 x 36.0 x 6.2 in. (354 x 914 x 158mm) *Antenna Weight: 13.8lbs Bracket Weight: 5lbs Wind Survival: 120 Mph Front Wind Load @100mph: 83.8 lbf Equivalent Flat Plate @100mph: 1.67 sq-ft. (c=2) Mounting Brackets: Wall or Pole "Stadium",919050 Adjustment Range: +/- 20º Lateral & +/- 55º VerticalClamps/Bolts: Stainless Steel CSS Antenna X7CAP-FRO-124-00-N Dual Band Xpol, 24° H-Beams NEW (6987) R New old stock. In great cosmetic condition. Taken out of box for photos. See pictures for more detail. X-Pol dual band, fast roll off, 0 deg EDT both bands with four N connectors. Manufacturer:CSS Antenna Model #: X7CAP-FRO-124-00-N Model: Dual Band Xpol, 24 H-BeamsSpecifications: Frequency 698-824/824-896/1710-1850/1850-1910/1910-2170 MHz Polarization: +/- 45º Gain: 12.2 dBi/ 12.5 dBi/ 12.5 dBi/ 12.6 dBi/ 13.0 dBi Horizontal Beam (3dB pts): 27º/24º/27º/25º/23º Vertical Beam (3dB pts): 70º/65º/65º/63º/58º Front-to-Back (Copolar): 27dB/ 27dB/ 30dB/ 30dB/ 30dB Sidelobe Suppression for 1st lobe above main beam: 16dB/ 16dB/ 18dB/ 18dB/ 16dB Electrical Downtilt: 0º VSWR / Return Loss: 1.70:1/11.7 dB Impedance: 50 Ohms Max. Power Per Connector: 250 CW at 800 MHz / 125 CW at 1900 MHz Isolation between ports: <-25dB Intermodulation (2x20W): <150dBc Input Connector (female): Type N or 7/16 DIN Dimensions (LxWxD) 13.9 x 36.0 x 6.2 in. (354 x 914 x 158mm) *Antenna Weight: 13.8lbs Bracket Weight: 5lbs Wind Survival: 120 Mph Front Wind Load @100mph: 83.8 lbf Equivalent Flat Plate @100mph: 1.67 sq-ft. (c=2) Mounting Brackets: Wall or Pole "Stadium",919050 Adjustment Range: +/- 20º Lateral & +/- 55º VerticalClamps/Bolts: Stainless SteelPorts marked: -45 698-896 MHz, -45 1710-2170 MHz , +45 698-896 MHz, +45 1710-2170 MHz Sold as is with 30 day Right of Return, only pictured items included Easy return/refund for any reason Anacapa Equipment RETURNS Anacapa Equipment Brokers, Inc. (“Seller”) strives to offer excellent customer service. You may return any equipment purchased from us for any reason within thirty (30) days after your receipt of the equipment for a full refund of the purchase price, provided that returned items are received in the same condition as sent. We DO NOT ship internationally. If you are using a freight forwarder then returns are VOID. SHIPPING All equipment purchased is shipped within one (1) business day (subject to freight availability) after receipt of payment and is shipped FOB place of shipment. We only charge actual shipping cost. If eBay overcharges for shipping, we issue an immediate refund for the difference. If you are undercharged, we will absorb the cost. We DO NOT ship internationally. IF you are using a freight forwarder then returns are VOID. LIMITED WARRANTY Buyer acknowledges that the equipment is being sold “as is" and without any warranty of merchantability or fitness for a particular use. The entire risk as to the quality and performance of the equipment is with the Buyer. Should the equipment prove defective following its purchase the Buyer and not the Seller, manufacturer, distributor, or retailer assumes the entire cost of all necessary servicing or repair. Buyer may inspect the equipment prior to purchase and placement of the order. Failure to inspect prior to placement of an order is deemed a waiver of Buyer’s right to inspect. Buyer is responsible for determining the suitability of the equipment for its application. Seller assumes no liability for the use or misuse of any equipment purchased by Buyer. It is assumed that the equipment will be installed and operated by qualified personnel. The Buyer agrees that the Seller shall not be held responsible or liable for any injuries or damages, whether incidental or consequential, associated in any way with the equipment purchased. The Buyer, by purchasing this equipment, indicates its acknowledgment of, and agreement, to the terms of this limited warranty. INDEMNITY Buyer shall be solely liable for, and shall defend, indemnify, and hold Seller, its Affiliates, and all of their respective directors, officers, employees, agents, and independent contractors (“Indemnitees”) harmless from and against any and all damages, liabilities, injuries, losses, costs (including reasonable attorneys and experts fees at trial and on appeal), and expenses which may be incurred by, asserted against, or recoverable from any Indemnitee as a result of any actual or threatened action, suit or proceeding arising out of or relating in any way to the purchase of equipment from Seller. The validity and interpretation of this Agreement and the enforcement thereof shall be governed by the laws of the State of California without regard to any principles governing conflicts of laws. Any dispute arising from the purchase of equipment from Seller must be resolved in the State Courts of California. Pictures sell!Auctiva offers Free Image Hosting and Editing. Track Page Views WithAuctiva's FREE Counter