USED 2015 FANUC ROBOCUT A-C400IA

Technical Data
• Main processor : (Qty. 1) 64 bit
• Aux processors : (Qty. 4) 32 bit
• Control method : Servo-closed loop
• Controlled axes : X, Y, U, V, Z
Plus optional rotary axis
• Least input increment : 0.000004”
• Least command increment : 0.00000004”
• Interpolation: Linear, Circular
• Maximum programmable dimension : ±999.99999 in.
• Position command : Coordinate Systems
Relative, absolute and machine values
• Display unit : 15” color liquid crystal display
• Position display : Five axes at a time (X, Y, U, V, Z)
Seven axes at a time by option
• Part program storage and editing : 4 MB (standard)
• Input / output interface : RS232-C, Ethernet interface,
PCMCIA-ATA style flash card, 2 USB Ports
• Rapid traverse : 1 ~ 50”/ min.
• Wire diameter compensation : 0 - ± 9.99999 in.
A list of M & G Codes utilized by the Fanuc Control is available upon
request
Machine Tool Features
• Floor space : 92” x 105”
• Machine weight : 4,000 lbs.
• Maximum cutting speed***
.012” brass wire guides 2.4 in. thick tool steel : 31 square in./hour
0.012” Coated wire 2.4” thick D2 tool steel : 33.5 square in./hour
• Internal Worktank Size (X x Y x Z) : 30.5” x 23.6” x 9.8”
• Maximum submerged cutting depth : 9.84”
• Maximum work piece weight : 1,100 lbs
• Travel
X Axis : 14.6”
Y Axis : 10.6”
Z Axis : 10.2”
UV axes travel : ± 2.362”
Rapid traverse : 1 ~ 50
Work piece thickness @ taper Angle : ± 12 @ 10 in
Manual threading (jet nozzle removed) ± 30 @ 3.26 in
* Requires optional Diamond guides ± 45 @ 1.6 in
• Positioning accuracy (X, Y) ± 0.0001
• Repeatability (X, Y) : ± 0.000050
• Axes drive motors : AC Servo Motors
Direct coupled to ball screw
• Wire feed system
Wire feed rate : 0 ~ 590 IPM
Wire tension : 200 ~ 2,500 g
Maximum wire spool weight : 35 lbs
Wire diameter (min. to max.) : 0.004 to 0.012”
• Wire guide – upper & lower guide : Round diamond
. Die guide
• Dielectric fluid system
Tank capacity : 145 gal
Chiller unit : Standard
Dielectric fluid : Deionized water
Resin bottle (one plus a spare): 1 cu. ft
Filters (2 each): Cartridge
Filtering precision: 3 Micron
Dielectric fluid resistively control: NC Controlled
• Cutting conditions
Automatic selection of 9 choices for 1 Cut: Standard
Automatic selection of 9 choices for multiple cut: Standard
Automatic selection of 3 choices for micro finish cut: Standard
• Programming methods
G-Code Programming: Standard
Built-in easy conversational: Standard
Off-line system via RS232 or Ethernet interface: Standard
Power Supply Features
• Power supply
Pulse generator type: Transistor driven
AC or DC: Switchable
Power supply circuit: Transistor pulse circuit
No loading voltage: Setting range 0 – 13
Cutting voltage: Setting range 3 – 18
On time: Setting range 1 – 255
Off time: Setting range 2 – 300
Servo voltage: Setting range 0 – 255
Programmable flushing: Setting range 1 - 18
Pulse mode: Setting range – 1, 2, 3, 4, 11, 12, 13, 14, 21, 31, 33, 41,43
• Total power required: 13 KVA (200/220 V ± 10%, 3 Phase, 60 Hz)
(CATALOG SPECIFICATIONS)