Introducing the new Acer 2160V Precision E-Lathe. With a swing of 20.9", 59.1" between centers, and a 3.1" spindle bore. 7.5 hp power and 2000 RPM ensure optimal performance. Standard accessories and optional upgrades available to enhance productivity.
| Swing | 20.9" | 530.86 mm |
| Centers | 59.1" | 1,501.1 mm |
| Spindle Bore | 3.1" | 78.74 mm |
| Power | 7.5 hp | 5.6 kW |
| RPM | 2,000 RPM | 2,000 RPM |
| Swing Over Cross Slide | 12.8" | 325.12 mm |
| Dimensions | 101" x 32" x 64" | 101" x 32" x 64" |
| Weight | 4,707Lbs. | 4,707Lbs. |
General Capacity:
• Swing over bed.......... 530 mm / 20.9"
• Swing over gap.......... 750 mm / 29.5"
• Swing over cross slide.......... 325 mm / 12.8"
• Distance between centers.......... 1500 mm / 59.1"
• Width of bed.......... 300 mm / 11.8"
Headstock:
• Spindle nose.......... D1 - 8
• Spindle bore.......... 78 mm / 3.1"
• Spindle speeds.......... 20 ~ 2000 r.p.m. (infinite)
• Taper of spindle bore.......... MT 7
Threading:
• Inch threads range.......... 4 ~ 56 T.P.I.
• Metric threads range.......... P 0.5 ~ P 7
• Longitudinal feeds range.......... 0.05 ~ 0.82 mm / 0.002" ~ 0.032"
• Cross feeds range.......... 0.02 ~ 0.40 mm / 0.0008" ~ 0.016"
• Leadscrew diameter.......... 35 mm / 1.4"
• Leadscrew pitch.......... 4 T.P.I. or 6 mm / 0.24"
• Taper of tail center.......... MT 4
Carriage:
• Compound rest travel.......... 125 mm / 4.9"
• Cross slide travel.......... 250 mm / 9.8"
Tailstock:
• Tail spindle travel.......... 150 mm / 5.9"
• Tail spindle diameter.......... 68 mm / 2.7"
Power:
• Main drive motor.......... 7.5 hp (5.625 kw)
• Coolant pump.......... 1/8 hp (0.1 kw)
Dimensions and Weight:
• Machine dimensions.......... 267 x 81 x 131 cm / 101" x 32" x 52"
• Packing dimensions.......... 279 x 95 x 162 cm / 110" x 32" x 64"
• Net weight.......... 2135 kgs / 4707 lbs
• Gross weight.......... 2285 kgs / 5038 lbs
Standard Accessories:
• 10” 3-Jaw Chuck D1-8
• Built-In Coolant System
• Steady Rest Bronze Tip 0.39” ~ 6.29” capacity
• Four Way Tool Post
• Halogen Work Light
• 4-Pos. Auto-Feed Stopper Ring
• Chuck Guard w/ Safety Switch
• Tool Box & Tools
• Chip Guard for Hand
• Center Sleeve
Optional Accessories:
• 16" 4-jaw independent chuck (D1-8)
• 12" 4-jaw independent chuck (D1-8)
• Follow rest
• 16" face plate
• 20" face plate
• "Aloris" tool post & 4 holders (#4-BS)
• "Aloris" tool post & 6 holders (#4-SET)
• "Dorian" tool post & 4 holders (SD40 CA-TS)
• Micrometer stop
• Four position carriage stop
• Taper turning attachment
• Installation fee for taper turning attachment
• 5c collet closer (lever-type)
• Installation fee for collet closer
• 5c collet set (1/16" - 1 1/16" x 16ths; 17 pcs/set)
• "Magnescale" 2-axis DRO (14" x 60")
• "Newall" 2-axis DRO (14" x 60")
• "Newall" E70 2-axis DRO w/ CSS
• Installation fee on Newall DP700 or Magnescale DRO
• Full length rear splash guard for 2160V
• Installation fee & hardware on rear splash guard
• Chuck guard w/ safety switch
• Installation fee for chuck guard
• Upgrade to 440v / 3 phase
*** Above prices are based on F.O.B. port of entry
*** Prices and designs are subject to change without notice.
*** Manufacturer reserves the right to modify the design without notice.
