NEW ACER E-LATHE 1760G

***MUST SPECIFY IF YOU NEED THE MACHINE WIRED FOR 220V OR 440V BASED ON WHAT YOUR SHOP IS WIRED FOR.
General Capacity:
• Center height.......... 8-3/4"
• Swing over bed.......... 17"
• Swing over gap (gap type only).......... 26"
• Swing over cross slide.......... 9-5/8"
• Distance between centers.......... 60"
Main Spindle:
• Spindle nose.......... D1-6
• Spindle bore diameter.......... 2-1/4"
• Type of spindle nose.......... MT.# 6
• Taper of center.......... MT.# 4
• Spindle speeds.......... 25~2200 rpm (infinite)
Carriage:
• Cross slide travel.......... 8-5/8"
• Compound rest travel.......... 7"
• Max. size cutting tool.......... 1" x 1"
Tailstock:
• Spindle diameter.......... 2-1/4"
• Spindle travel.......... 6"
• Taper of center.......... MT.# 4
Bed:
• Bed length.......... 93"
• Bed width.......... 12"
• Width of gap.......... 8-3/4"
Threading & Feeding:
• System.......... inch/metric
• Pitch of leadscrew.......... 35 ø, 4 TPI
• Metric pitch threads.......... 0.5~7mm/pitch (22 kinds)
• Inch pitch threads.......... 4~56 TPI (36 kinds)
• Module pitch threads.......... 0.5~3.5 M.P. (12 kinds)
• Diametral pitch threads.......... 8~56 D.P. (21 kinds)
• Range of longitudinal feeds.......... 0.002"~0.028"/rev.
• Range of cross feeds.......... 0.001"~0.014"/rev.
Power:
• Main drive motor.......... 7.5 hp
• Rapid traverse motor.......... 10 hp
• Coolant pump motor.......... 1/8 hp
Dimensions and Weight:
• Floor dimension.......... 105" x 40"
• Net weight.......... 3950 lbs
• Gross weight.......... 4260 lbs
• Packing dimension.......... 107" x 41" x 67"

Features:
• Infinite 25-2200 (3 gear range) constant spindle speed. Easy change in no time (4 sec).
• High efficient 7.5 HP spindle motor for high torque output.
• Accept both single phase and three phase power.
• Low maintenance and down time cost due to fewer gears in headstock.
• Constant surface speed (optional).
• Electronic and mechanical brake for fast spin spindle stops internal threading.
• No R.P.M. gear changer break down, accurate reading on R.P.M. to prolong tool life.
• Save energy cost up to 35%.
• Spindle speed could be adjusted to best condition during cutting.

Standard Accessories:
• Gap Bed
• Built-In Coolant System
• Face Plate
• Touch-up Paint, Toolbox with Tools
• Operations Manual
• 4-Way Tool Post
• Halogen Work Light

Optional Accessories:
• 3-Jaw Scroll Chuck
• 4-Jaw Independent Chuck
• 3-Jaw Adaptor Plate
• 4-Jaw Adaptor Plate
• Steady Rest
• Follow Rest
• LED Light
• 4-Position Carriage Stop
• Micro Carriage Stop
• Live Centers
• Taper Turning Attatchment
• Splash Guard
• Chuck Guard W/Safety Switch
• Change Gears for DP & MP Thread
• 5C Collet Closer
• Drive Plate
• Quick Change Tool Post
• Digital Readout
• Chip Guard

*** Above prices are based on F.O.B. port of entry
*** Prices and designs are subject to change without notice.
*** Manufacturer reserves the right to modify the design without notice.