USED 1967 LANDIS 1R 10X20

1967 LANDIS 1R 10X20 cylindrical grinder with a 10" swing and 20" centers. Features a 12" grinding wheel, 3 HP wheel power, and various traverse controls. Ideal for precision grinding needs. 106x50 floor space required.

1R LANDIS CYLINDRICAL UNIVERSAL GRINDER

S/N 835‑8 Year:1967

STANDARD CATALOG SPECIFICATIONS
Nominal work swing................................. 10"
Nominal distance between work centers.............. 20"
Max diameter work standard machine will grind with full size standard wheel.................. 10 7/8"
Max diameter work standard machine will grind with full size standard wheel...........10 7/8"
Minimum diameter wheel to grind zero diameter work on centers........................................... 10 1/2" Minimum diameter wheel to grind zero diameter work on centers........................... 10 1/2"
Floor space required............................... 106"x 50"
Coolant tank capacity in gallons................... 19
Hydraulic tank capacity in gallons................. 9 1/4
Height from floor to work centerline............... 41 3/4

WORK CARRIAGE
Traverse speed, inches per minute.................. 2 ‑ 240
Carriage traverse per turn of hand wheel........... 0.200
Swivel graduated, inches per foot.................. 4
Degrees included angle............................. 20 Degrees
Work rest capacity.................................1/4" to 4"

HEAD STOCK FOOT STOCK
Head stock work center............................. #10 Jarno
Foot stock work center............................. # 6 Jarno
Head stock swivel range............................ 120 Degrees
Work speeds, RPM.................... 60, 90, 150, 225, 400, 600
Diameter hole thru spindle......................... 1"
Head stock spindle nose............................ 5A2

WHEEL HEAD WHEEL FEED
Grinding wheel size................................ 12"x 3"x 5"
Minimum diameter of worn wheel..................... 7 1/2"
Maximum distance wheel centerline to work
centerline for machines w/hydraulic infeed......... 12 1/2"
Minimum distance wheel centerline to work
centerline with foot stock removed................. 3 1/2
Work diameter reduction per revolution of
handwheel......................................... .100"
Per revolution of fine feed knob................... 0.001"
Minimum feed graduations on diameter............... 0.000050"
Maximum hydraulic infeed on diameter
For machines with hydraulic infeed................. 0.090"
Rapid infeed stroke................................ 1"
Grinding wheel head swivel range..............90 Degrees each way

ELECTRIC MOTORS
Wheel drive motor.................................. 3 HP
Work drive motor................................... 1/4 HP
Wheel spindle lubrication motor.................... 1/4 HP
Coolant pump motor.................................1/10 HP
Hydraulic pump motor for machines w/hydraulic
traverse and/or hydraulic infeed................... 1 HP
Internal grinding spindle motor.................... 1 HP

EQUIPMENT FEATURES
Hand traverse.
Hydraulic traverse.

EQUIPMENT FEATURES
L.H. Tarry.
R.H. Tarry.
Traverse reverse lever.
Start - stop lever.
One shot lubrication.
High low work head speed.
Traverse rate valve.

Specifications are deemed accurate, however, subject to verification or prior sale.

All exchange units/returns must be shipped within 30 days. All exchange units/returns must be shipped using DDPterms - Grinders Clearing House, Inc. dba GCH Machinery, is not responsible for any customs formalities or shipping costs.

If Grinders Clearing House, Inc.dba GCH Machinery does not receive exchange/core unit back within 30 days, GCH will invoice FULL replacement cost (OUTRIGHT Cost) to customer.