AI search could not be completed. Please try again or adjust your search.
2012 TOS WHQ-13 CNC horizontal boring mill with Heidenhain TNC i530 control and full-contouring rotary table. Features 197" x 118" x 39" travels, 80" W-axis column travel, 5.1" spindle with #50 taper, 50 HP, and 3,000 RPM. Equipped with through-spindle coolant, Renishaw probe, 40-position tool changer, hardened ways, and spindle oil temperature compensation.
| Spindle Size | 5.1" | 129.54 mm |
| X-Horiz Tvl of Table | 3,225 mm | 126.97" |
| Y-Vert Tvl of Head | 2,490 mm | 98.032" |
| Power | 37.3 kW | 50 hp |
| RPM | 3,000 RPM | 3,000 RPM |
| Table-W | 1,800 mm | 70.866" |
| Table-L | 2,500 mm | 98.425" |
2012 TOS WHQ-13 CNC Horizontal Boring Mill
With Heidenhain TNC i530 Control
================================================
CAPACITY
- X-Axis: 197 in (5 m)
- Y-Axis (Vertical): 118 in (3 m)
- Z-Axis (Spindle): 39 in (1 m)
- W-Axis (Column In/Out): 80 in (2 m)
- Table Size: 71 in x 98 in (Rotary, Full Contouring)
- Maximum Table Load: 56,000 lb
- Spindle Diameter: 5.1 in
- Spindle Taper: #50
- Max Spindle Speed: 3,000 RPM
- Spindle Drive Motor: 50 HP
================================================
EQUIPPED WITH
- Heidenhain TNC i530 CNC Control
- Rotary Table — 360,000-Degree Index, Full Contouring B-Axis
- T-Type Configuration (Column In/Out)
- All Hardened Ways
- Spindle Oil Temperature Compensation
- Through-Spindle Coolant
- Coolant Filter, Paper Roll Type
- Renishaw Probe
- 40-Position Tool Changer
- Chip Conveyor
- Auto Lube System
- Mist Collector
- Spindle Nose Support
