Used Vertical Machining Center with 7.5 hp, 6000 RPM, CAT-40 taper, and 16"x12"x10" travel. Includes CNC control, USB port, tool management, and coolant system. 59,843 power hours, 2,280 cutting hours. Wired for 460V/3Ph/60Hz.
| X | 16" | 406.4 mm |
| Y | 12" | 304.8 mm |
| Z | 10" | 254 mm |
| Power | 7.5 hp | 5.6 kW |
| RPM | 6,000 RPM | 6,000 RPM |
| # ATC | 10 | 10 |
| Taper | CAT-40 | CAT-40 |
| Table-W | 12" | 304.8 mm |
| Table-L | 36" | 914.4 mm |
| # Axis | 3 | 3 |
| Control | CNC (HAAS) | CNC (HAAS) |
| Dimensions | 90” x 64” x 100” H | 90” x 64” x 100” H |
| Weight | 4200 Lbs | 4200 Lbs |
Minimum / Maximum spindle nose to table- 4” / 19”
X,Y,Z Rapids- 800 I.P.M.
Number of T slots- (3)
Maximum table weight- 500 Lbs.
HAAS CNC Control , USB Port
Machine hours- Power on hours- 59,843, Cycle hours- 3,023, Cutting hours- 2,280
Control options- DNC enabled, M19 Spindle orient, Macro’s, Quick code, Pre-Orient Tap, HSM High Speed Machining, Advanced tool management, Intuitive programming system
Programable coolant nozzle
Machine manual
Air blow off gun
Coolant tank & pump
Machine is wired for 460 volt / 3 phase / 60 H.Z.
