30 GPM ZYKLOMAT MODEL #AKBF-R CONTINUOUS FILTER COOLANT SYSTEM, WITH DRAG-OUT & TURBO-HKS CENTRIFUGE SEPERATOR: YOBRO #24734

With a considerably lower basic space requirement, the extremely compact AKBF-Rs achieves a much better filtration result with the same filtering capacity compared to conventional flat-bed belt filters - and that with a considerably smaller space requirement.
The constructive design ensures that, even when using thin filtering aids, such as filter fleece, large quantities of sludge and chips can easily be filtered and discharged. With its variable design, the shape (rectangular, oval, round) and position (right, left, top, bottom) of the infeed area on the side wall can easily be adapted to the plant circumstances. For example, with smaller filter models no lifting pumps are required. The soiled liquid then flows directly from the machine discharge into the filter.
Especially in the waste-water treatment sector, this system is often used as a pre-filter before the actual ultra-filtration or for dewatering flocculent sludge. By using certain filter fleeces, total purification of the waste water can be carried out. This eliminates the need for a chamber or frame filter press.
In contrast to ordinary bag or cartridge filters, no regeneration phase is required, and the actual filtration process is not interrupted.

Coolant cleaning and supply for: 1 or 2 lens-generating machine(s) (LOH, Schneider, OptoTech, etc.) and for 10 - 12 edge treatment machines.
Mode of operation sim­ilar to UN1-KM 50 with higher performance ratings.

Brand
Not Specified
Type
Filters, Miscellaneous
Stock No.
24734
Contact Us