USED 1956 WARNER & SWASEY 2A M-3470
Overview
Description
2 A Used Warner & Swasey Square Head Saddle Type Turret Lathe Model 3470 Lot 02 Extended Bed
Specifications
| Model | Model 3470 | Model 3470 |
|---|---|---|
| Swing | 20" | 508 mm |
| Center Distance | 67 in | |
| Dimensions | 176" L. X 83" W. X 65" H. | 176" L. X 83" W. X 65" H. |
| Weight | 13,000 Lbs. | 13,000 Lbs. |
Swing Over Bed Ways 20-1/2"
Swing Over Cross Slide Carriage 16"
Center Distance 67"
Spindle Hole 3-3/4"
Spindle Nose A - 11
Spindle Speeds 6 To 1,117 Rpm's
Chuck Size 16" 3-Chuck
Feeds Long. .005 To .167 I.P.R.
Feeds Cross .0025 To .082 I.P.R.
Main Motor 20 / 40 Hp. 440 Volts
Floor Space 176" L. X 83" W.
Machine Height 65"
MAchine Weight 13,000 Lbs.
Flange Holders Long 1
Flange Holders Short 2
Cross Sliding Rear Turret Yes
Rapid Traverse Front & Rear Carriages Yes
Tool Post 4 Way On Front Carriages Yes
Coolant Yes
Note Reconditioning: Machines front & rear aprons and rapid traverse box
will be reconditioned. Rapid traverse drive box will be reconditioned, new
bearings in main motor. New feed and rapid shafts. Headstock cleaned and flushed,
new filters and oil. New lockdown pin and bushing in hex and square turret. New nut
and screw in cross slide. Gibs reworked and refitted. New 16"4-jaw Gator chuck with
reconditioning. It is recommended that you re-bore the flange tool holders on the
rear turret to ensure they are on center once the machine is level.
Machine will be cleaned, painted, and cycled. Machine may
be seen under power with proper notice.
It will take about 6 weeks to complete the reconditioning once a P.O. is received.
Optional:
12" 3-Jaw A2-11 Gator Steel Body Scroll Type Chuck $ Call For Price