USED BARBER COLMAN 16-16

Barber Colman horizontal hobber
Model 16-16
s/n 3049
Machine is equipped with A Differential Mechanism

this machine can be inspected prior to removal at gear shop in
Maryland . the machine is in very good mechanical running condition
with lots of tooling and gears.

machine specifications are as follows
Machine catalog specifications:
* Max. DP in Steel 6 DP-10 DP 
* Max. Work O.D. 16" 
* Max. Hob Slide Travel 16" 
* Diameter of Hole Through Work Spindle 3-1/8" 
* Max. Hob Diameter 5" 
* Max. Vertical Adjustment of Work Spindle 8" 
* Dist. C/L of Work Spindle to Underside of Overarm 8" 
* Dist. C/L of Work Spindle to C/L of Hob Spindle,
Max./Min 8.75"/0.75" 
* Dist. Face of Work Spindle to C/L of Hob Spindle,
Max./Min 19.5"/3.5" 
* Max dist of shaft from spindle face - tailstock 30" approx
* Max. Hob Slide Swivel Angle Setting 45 Degrees 
* 9 Hob Speeds (when equipped with suitable gears) 59-246 RPM 
* Hob Feeds (when equipped with suitable gears) .0075-.1125" 
* Floor Space (approx.) L x W x H 82" x 38" x 76" 
* Weight (approx.) 6500 lbs

Machine Equipped With:
* Differential Mechanism
* single-Start index worm and Gear
* 1 Hob Arbor (1-1/4")
* Manual hob Hob shift
* Tailstock- screw type
* Power 440 volt 3/phase
* 25-30 Change Gears approx
* misc tooling

Note: Machine can be inspected under power with Proper Notice.
Contact Rich Piselli at [email protected] to set up an inspection
or Visit our website at WWW.PiselliEnt.com to view this and other
Gear machinery!