AI search could not be completed. Please try again or adjust your search.
| X Axis Travel | 29.9" | 759.46 mm |
| Y Axis Travel | 20" | 508 mm |
| Z Axis Travel | 24" | 609.6 mm |
| Cutting Feed Rate | 16,404 ft/min | 16,404 ft/min |
| Spindle Motor | 15 hp | 11.2 kW |
| Spindle Speed | 6,000 RPM | 6,000 RPM |
| Spindle Taper | MAS-CT 40 | MAS-CT 40 |
| Max. Table Load | 1,543 Lbs | 1,543 Lbs |
| Dimensions | 97.6" x 153.3" x 116.1" | 97.6" x 153.3" x 116.1" |
| Weight | 14,550 Lbs | 14,550 Lbs |
Fanuc OMF Control
24 Position Double Arm Automatic Tool Changer
Screw Type Chip Conveyor
19 3/4" x 39 1/2" Stevens Drilled & Tapped Sub-Plate
Coolant Pump Motor: ½ HP
Lubrication Pump: 3 Watt
Power Requirement: 20 KVA
Hydraulic Pressure: 35 kg/cm2
Air Source: 6 kg/cm2
Electrics: 240 Volts, 3 PH, 60 CYC
Max. Tool Diameter: 3.9"
Max. Tool Length: 9.8"
Max. Tool Weight: 15 Lbs
ATC Time Tool To Tool: 2.5 Sec
ATC Time Chip To Chip: 5 Sec
