AI search could not be completed. Please try again or adjust your search.
2007 BRIDGEPORT HARDINGE EZ VISION 3-AXIS CNC KNEE MILL with 3-Axis CNC Control, Power Draw Bar.
| X | 30" | 762 mm |
| Y | 12" | 304.8 mm |
| Z | 14" | 355.6 mm |
| Power | 2 hp | 1.5 kW |
| RPM | 4,200 RPM | 4,200 RPM |
| Taper | 30 | 30 |
| Table-W | 48" | 1,219.2 mm |
| Table-L | 9" | 228.6 mm |
| # Axis | 3 | 3 |
| Control | CNC (EZ Vision) | CNC (EZ Vision) |
| Dimensions | 70" x 77" x 87" high | 70" x 77" x 87" high |
| Weight | 3500 LBS | 3500 LBS |
Table size.......................9" x 48"
Longitudinal travel..............30"
Cross travel.....................12"
Vertical travel of knee..........14"
Quill travel.....................5"
Spindle speeds...................60 to 4200 RPM (infinitely variable)
Spindle quill feeds..............0.0015" – 0.003" – 0.006"
Ram travel.......................12"
Positioning speed (X-Y axis).....100 inch / minute
Feed rate range (X-Y axis).......0.1 to 100 inch / minute
Throat...........................6-3/4" to 18-3/4"
Distance table to spindle nose...2-1/2" to 18-1/4"
Motor............................2 HP / 1735 RPM
Volts............................230 / 460
Phase............................3
Cycles...........................60
Full load amps...................6.2 / 3.1
Approximate dimensions...........70" x 77" x 87" high
Approximate weight...............3,500 lbs.
Bridgeport / Hardinge EZ Vision 3-Axis CNC Control
Power Drawbar
Work Light
**BUYER RESPONSIBLE FOR VERIFYING SPECIFICATIONS & OPTIONS**
