USED 2021 KENT KVR-4020A

CAPACITY:
X axis travel: 1000 mm (39.4 in)
Y axis travel: 500 mm (19.7 in)
Z axis travel: 520 mm (20.5 in)
Table size: 1100 x 500 mm (43.3 x 19.7 in)
Table load capacity: 800 kg (1760 lb)
T-slots: 5 slots (width x pitch): 18H8 x 100 mm (0.71 x 3.94 in)
Table height from floor (approx.): 935 mm (37 in)

SPINDLE:
Spindle nose to table top: 80~600 mm (3.1~23.6 in)
Spindle center to column: 557 mm (21.9 in)
Spindle nose taper: CAT-40
Spindle speed: 10,000 rpm
Spindle drive type: belt, direct transmission
Spindle motor: 11 kW (15 hp
Spindle torque: 70 Nm (52 ft-lb)

TOOL CHANGER:
Number of tools: 24+1 T
ATC type: double arm, side-mount
Maximum tool diameter: 76 mm (3.0 in)
Without adjacent tool: 150 mm (5.9 in)
Maximum tool length: 300 mm (11.8 in)
Maximum tool weight: 5.5 kg (12.1 lb)
Tool change time (TTT): 1.3 sec
Retention knob type: RK40CV

MOTION:
Rapid traverse X/Y/Z: 36/36/32 m/min (1417/1417/1260 in/min)
Cutting feed rate: 15 m/min (590 in/min)
Axis drive type: direct coupled zero-backlash
Axis motor X/Y/Z: 3.0/3.0/3.0 kW (4.0/4.0/4.0 hp)
Guide ways X/Y: linear “Roller” type, 30 mm (1.2 in)
Guide ways Z: linear “Roller” type, 35 mm (1.4 in)
Ball screw diameter: 32 mm (1.26 in)
Positioning accuracy: ±0.005 mm (±0.0002 in)

UTILITY:
Electrical power required: 20KVA / 3PH / 220V
Compressed air required: 5.5 bar (80 psi)
Coolant tank size 230 L (60 gal)
Lubrication tank size: 2 L (0.5 gal)

DIMENSION:
Machine height (max) 271 cm (8.9 ft)
Machine width x depth 374 x 367 cm (12.3 x 12.1 ft)
Machine net weight 4380 kg (9,636 lb)
Shipping dimension (L x W x H) 295 x 227 x 252 cm (9.7 x 7.5 x 8.3 ft)
Shipping weight 4950 kg (10,900 lb)