Dynacon 12"x 9' Portable Incline Parts Conveyor Plastic Cleated Belt DC Drive

Plastic conveyor frame with open grid plastic belt. On aluminum adjustable leg supports. NOTE: One of the leg supports is missing a bolt on the bottom. Has locking caster wheels at both ends.
Condition & Set-Up: In good working condition. Tested.
Drive Type: Direct drive.
Motor & Gearbox: Motor is missing the tag. Tested with a DC drive controller. We currently don't have one available for this conveyor.
Bed Length: 48" Infeed. 50" Incline. 22" Flat discharge.
Frame Width: 14"
Bed Width: 300mm (11.81") Conveyor bed width is just under 12" (300mm) 
Belt Width: 12"
Frame Height: 8" Sides
Belt Speed: 1-6 FPM. Speed was tested with a drive that is not included with the conveyor.
Bed Height (From Floor): Infeed 10-1/2" Discharge: 43-1/2" when level. Height can be adjusted a few inches at the front end only.
Belt Surface (Type) and Condition: Intralox type plastic open grid with 2" cleats.
Voltage tested and wired for:: 115V
Overall Length: 108"