Continental D2FNSAPT 52" Designer Line Two Section Pass Thru Freezer, (4) Left/right Hinge Solid Doors, 115v

The Continental D2FNSAPT two-section pass-thru freezer's cabinet is illuminated with LED lights and features six epoxy-coated shelves with a wire configuration for uniform airflow. The interior is accessible through the four solid doors; these doors self-close when left open and seal tightly with magnetic gaskets. Made with stainless steel exterior panels and aluminum interior panels, this unit supports a long-lasting design. Overall, this freezer measures 52 inches wide by 383/4 inches deep by 831/4 inches high and is mounted on four 6-inch legs.
Insulated with polyurethane foam, the Continental D2FNSAPT freezer retains temperature levels from 0 to -10 degrees Fahrenheit. Staff can set and adjust the holding temperature using electronic controls, which comes with an external temperature readout and high/low alarm. The self-contained refrigeration system uses R-290 hydrocarbon refrigerant for an eco-friendly operation, while the defrost system and hot gas condensate evaporator both operate automatically for energy efficiency.
Designer Line Freezer, pass-thru, two-section, self-contained refrigeration, stainless steel exterior, aluminum interior, standard depth cabinet, full-height solid doors, cylinder locks, electronic control with digital display, hi-low alarm, 6" stainless steel legs, R290 hydrocarbon refrigerant, 1 HP, cETLus, NSF
*Image may not depict product color, inclusions or accessories.
Important Prop 65 information for California residents.
Specifications

Manufacturer: Continental
Compressor Location: Top
Cubic Feet: 50
Depth (in): 38.75
Door Design: Full
Door Type: Solid
Height (in): 83.25
Hertz: 60
Hinge Configuration: Left/Right
Interior Material: Aluminum
NEMA: 5-15P
Phase: 1
Product: Reach-In Freezers
Product Type: Commercial Refrigeration
Rating: Better
Refrigerant: R290 (Hydrocarbon)
Sections: 2
Series: Designer Line
Type: Pass Thru
Voltage: 115
Warranty: 6-year Parts & Labor; 7-year Compressor Parts
Width (in): 52
Weight: 720.00