Heavy duty, low production mitering saw that comes with one standard Bi-metal blade. Dual operating modes and hydraulic controlled down feed. 1.75HP, 220V motor with up to 60°right mitering capabilities. Ergonomic design for operator’s comfort and control. Horizontally mounted guide arms for more rigidity and straightest cuts.
8.5″ New Dake Stationary Mitering Band Saw Model SE 8.5 M Specifications:
8.5″ New Dake Stationary Mitering Band Saw Model SE 8.5 M Features:
Hydraulic controlled down feed with adjustable manual return.
Automatic shut off at the end of the cut.
Dual operating modes with rapid head descent.
Powerful, flame tempered, manual clamping vise. Hand wheel adjusted with quick release lever for rapid vise opening and closing action. The vise clamps material firmly.
Ergonomic designed for operator’s comfort and control.
Gear box is direct bolted to the bow for less vibration, and positive drive gear box is direct driven via steel and bronze gears, no belts and pulleys to contend with.
CE certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch and blade cover interlock.
Miters up to 60º right. Mitering pre-sets with flip up stops makes set up fast and has precise with miter scale for all angles in between. The head turns, the material doesn’t.
Blade tensioning is done via “Go No Go” tensioning system with LED, taking the guesswork out of tensioning. Saw will not run if blade tension is not correct.
Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable.
Three areas of coolant distribution for even blade coverage.
Electric coolant pump and self-contained coolant system.
Steel fabricated base, and stock stop gauge.
Standard Equipment:
Steel base
Standard bi-metal blade
Coolant
Manual vice
Part Number: 983111-2
Capacity: 8-1/2″ round
Horsepower: 1.75
Voltage: 220V, 3 phase
Maximum Blade Speed: 230 fpm
Blade Width: 1″
Blade Length: 101″
Blade Speed: 114 – 230 fpm
Solid Round 90º Capacity: 8-1/2″
Solid Round 45º Right Capacity: 6-3/4″
Solid Round 60º Right Capacity: 4-1/4″
Solid Square 90º Capacity: 7-3/4″
Solid Square 45º Right Capacity: 6-3/4″
Solid Square 60º Right Capacity: 4-1/4″
Solid Rectangle 90º Capacity: 10-3/8″ x 7-3/4″
Solid Rectangle 45º Right Capacity: 7-3/4″ x 6-1/4″
Solid Rectangle 60º Right Capacity: 4-1/2″ x 4″
Worktable Height: 37″
Height: 71″
Floor Space: 33″ x 58″
Floor Space Left to Right: 33″ x 58″
Floor Space Front to Back: 33″ x 58″
