10″ x 16″ New DoAll Horizontal Band Saw Structural Model 400S
The 10″ x 16″ DoALL 400S general purpose band saw is part of the StructurALL® family of horizontal metal cutting scissor saws. Swiveling 45 degrees, it’s the ideal machine for the small to medium fabricator or machine shop, looking to make extremely accurate (straight or miter) cuts in smaller quantities. The DoALL 400S model features a 10″ (229mm) high x 16″ (406mm) wide capacity of rectangles and 10-3/4″ (273mm) rounds. This 10″ x 16″ DoALL manual machine can be equipped with a variety of options to further ease operation, such as pneumatic head-lift and pneumatic vise attachments.
10″ x 16″ New DoAll Horizontal Band Saw Structural Model 400S Specifications:
10″ x 16″ New DoAll Horizontal Band Saw Structural Model 400S Features:
Fixed Control Console: Ergonomically placed control console for ease of operation and safety of the operator.
Variable Frequency Band Drive: The Variable Frequency Band Drive allows the operator to dial in their band speed to fine tune cutting performance supplying maximum torque to the tooth tips of the saw band.
Rapid head down w/ Feed Control: Three position head control allows the operator in rapid mode to quickly position the saw head above the material, the head will stop at position in the hold mode, and create feed rates with the micrometer adjustment in the feed mode for maximizing cutting performance.
Coolant Thru Carbide Faced Saw Guide Inserts: Supplies coolant to the blade evenly before the cut creating straighter cuts and allowing longer blade life due to coolant being supplied at the tooth tip.
Band Wheels: Flange cast steel wheels insure band tracking to prevent tooth set loss.
Rack and Pawl Vise: Time honored rack and pawl vise system using an acme thread screw minimizes setup/clamping time aiding in increased production and decreased vise maintenance.
Manual Blade Tension: Positive stop to prevent possible error of over/under tightening the band for maximum cutting rates and band life.
Band Brush: Gear driven band brush removes the chips from the blade gullets which would prevent the blade from attaining maximum cutting rates and blade life.
Counter Balance Spring: Counterbalance spring maintains constant head weight thru out the cut keeping the blade tooth load equal aiding in maximum blade life.
Warranty: One year parts only subject to terms and conditions. Optional ten year warranty is available.
10″ x 16″ New DoAll Horizontal Band Saw Structural Model 400S Standard Equipment:
Swivel head to 45 degrees
Fine adjustment head feed control
Fixed control console
Rapid head down approach
Spring loaded, zero clearance, coolant through, carbide faced saw guide inserts
Quick action rack and pawl vise system w/ Acme Thread
Gear driven band cleaning brushes
Variable frequency drive
Heavy duty counter balance spring
Flange backing band wheels
Manual band tension
Recirculating coolant system
Discharge tray
Replaceable steel wear plates on bed
Saw blade guards
Band door interlocks
Operation and parts manuals on USB stick
Recommended band speed chart
One (1) complimentary DoALL Bi-Metal saw blade
Complimentary DoALL Cutting Fluids package
10″ x 16″ New DoAll Horizontal Band Saw Structural Model 400S Optional Accessories:
Capacity at 90° rectangle: 10″ x 16″
Capacity at 90° round: 10-3/4″
Capacity at 45° rectangle: 9″ x 10-3/4″
Capacity at 45° round: 10-3/4″
Saw blade (width x length): 1″ x 158″
Motor HP: 2 Hp VFD
Band speed: 50-400 fpm
Band tension: Manual
Motor HP: N/A
Reservoir size: N/A
Flood: Yes
Mist lubricator: Opt
Motor HP: 1/15 Hp
Reservoir size: 6 gallon
Length per stroke: N/A
Maximum index strokes length: N/A
Remnant length: N/A
W x L x H: 87″ x 42″ x 55″
Material pass height: 29″
Machine weight: 1,200 lbs
Voltage requirement (Wye configuration-must specify at order placement): 208V, 230V, or 460V-60Hz-3ph
Total amp draw (FLA): 7.2 (208)
6.9 (230)
3.5 (460)
