USED 1997 OKUMA IMPACT LU-15M
Overview
Description
OKUMA IMPACT LU-15M 5-Axis Twin Turret CNC Turning Center, New in 1997.
Live Milling.
21" x 24".
Specifications
| Swing | 20.87" | 530.1 mm |
|---|---|---|
| Machining Length | 23.62" | 599.95 mm |
| # Axis | 2 | 2 |
| Chuck Size | 8" | 203.2 mm |
| Bar Capacity | 3.15" | 80.01 mm |
| Power | 30 hp | 22.4 kW |
| Max RPM | 4,500 RPM | 4,500 RPM |
| Turning Dia | 10.62" | 269.75 mm |
| Tailstock | Yes | Yes |
| Live Tooling | Yes | Yes |
| Sub Spindle | No | No |
| Control | CNC (Okuma OSP7000L) | CNC (Okuma OSP7000L) |
| Dimensions | 156" x 83" x 76" | 156" x 83" x 76" |
| Weight | 1200 | 1200 |
General Specifications:
Swing Over Bed 20.87"
Swing Over Carriage 14.96"
Swing Over Cross Slide 12.99"
Maximum Turning Diameter 10.62"
Maximum Turning Length 23.62"
X-Axis Travel (Upper/Lower) 10.24"/5.51"
Z-Axis Travel (Upper/Lower) 25.20"/24.21"
Headstock & Main Spdl Nose JIS-A2-8
Spindle Bore Diameter 3.15"
Spindle Speed Range to 4500 RPM
X-Axis Rapid Traverse Speed 590 IPM
Z-Axis Rapid Traverse Speed 787 IPM
X-Axis Cut Fdrates (IPR) 0.0001"-40000
Z-Axis Cut Fdrates (IPR) 0.0001"-40000
Motor, Horsepower 29.5 HP
Floor Space Req. 156" x 83" x 76"
Weight Approximately 12000 LBS
Equipped With
8" 3-JAW CHUCK
OKUMA OSP7000L CNC CONTROL
LIVE MILLING CAPABILITIES
12 POSITION UPPER & 8 POSITION LOWER TURRET
(DOES NOT HAVE THE CHIP CONVEYOR) -
COOLANT TANK
Tailstock