USED 2024 GRIZZLY G0699

2024 Grizzly G0699 12-inch sliding table saw with scoring located in Michigan. Seller describes the machine as being in excellent condition. Call iBiD Machinery at (678) 925-3556 for availability, inspection and loading details.
Grizzly G0699 sliding table saw overview
The G0699 is a production sliding table saw for sheet goods and precise panel cutting. It also has a dedicated scoring blade to reduce tear-out on laminated and finished materials.
Grizzly G0699 sliding table saw specifications

Main motor: 7.5 hp, 220/440V, 3-phase; factory literature shows 220V prewire
Scoring motor: 1 hp
Main blade: 12 in.; approximately 4,000 rpm
Scoring blade: 4-3/4 in.; approximately 8,000 rpm
Rip capacity: approximately 49-3/4 in.
Crosscut capacity: approximately 126 in.
Blade tilt: 0–45°
Maximum depth of cut at 90°: approximately 3-5/16 in.
Maximum depth of cut at 45°: approximately 2-3/8 in.
Sliding table: approximately 126 x 14 in.
Main table: approximately 59 x 68 in.
Dust ports: 5 in. main and 4 in. upper

Inspecting this Grizzly G0699 sliding table saw
First, use the machine ID plate to confirm its voltage setup. Then, inspect the main blade, scoring setup and sliding table. Also, check the included fences, stops, dust connections and accessories.
*To the best of our knowledge, these model-reference specifications reflect available manufacturer information. However, the actual setup, options, size and capabilities may vary with the year, serial number and installed equipment. Therefore, buyers should independently confirm all specifications and inspect the machine before purchase.
Space, tooling and electrical planning*

Base footprint: approximately 74-1/2 x 35-1/2 inches.
Overall assembled size: approximately 139 x 133 x 45 inches.
Published space for full movement: approximately 280 x 139 inches. The base footprint is not the operating envelope; also allow for stock handling.
Main-blade arbor: 1 inch; scoring-blade arbor: 20 mm.
Table height: approximately 36 inches.
Published full-load current: 23A at 220V or 11.5A at 440V; minimum circuit reference: 30A or 15A respectively.

*These are model references from Grizzly's G0699 data sheet, not measurements or electrical verification of this 2024 machine. Therefore, check the nameplate, serial-specific manual and required clearances before installation. Also, have a qualified electrician verify the supply.