AI search could not be completed. Please try again or adjust your search.
1985 Alliant 42VC Vertical Milling Machine with New DRO, Power Feed, and Kurt Vice. Machine has been in Home Shop of Retired Aerospace Shop Owner for Side Projects. Lightly Used Only.
| Table-W | 9" | 228.6 mm |
| Table-L | 42" | 1,066.8 mm |
| Travel-Long | 30" | 762 mm |
| Travel-Cross | 12" | 304.8 mm |
| Power | 2 hp | 1.5 kW |
| RPM | 4,500 RPM | 4,500 RPM |
| Taper | R-8 | R-8 |
| Dimensions | 68" x 68" x 89" | 68" x 68" x 89" |
| Weight | 2,400 LBS | 2,400 LBS |
Table Working Surface...............9" x 42"
T-Slot Number, Size.................3, 5/8"
Table Travel X-Axis.................30"
Saddle Travel Y-Axis................12"
Ram Travel..........................12"
Quill Travel........................5"
Knee Travel.........................16"
Spindle to Column (min-max).........6-3/4" – 18-1/2"
Spindle to Nose to Table............2-1/8" – 18"
Spindle Motor.......................2 HP
Wiring Voltage......................220V, 3Ph, 60Hz
Taper...............................R-8
Speed (vari speed)..................60-4,500 RPM
Quill Feed (IPR)....................0.0015", 0.003", 0.006"
Head Swivel.........................360 Degree
Head Tilt; right-to-left............45 degree
Head Tilt; up-and-down..............45 degree
Approx. Shipping Dimensions.........68" L x 68" W x 89" H
Weight..............................2,400 LBS
Newall Digital Readout (NEW)
Power Feed
Kurt Vice
**BUYER RESPONSIBLE FOR VERIFYING SPECIFICATIONS & OPTIONS**
