USED 2006 MAZAK INTEGREX 200-IV ST-1000U
Overview
Specifications
| Maximum Swing | 26" | 660.4 mm |
|---|---|---|
| Max Turning Diameter | 26" | 660.4 mm |
| Main Spindle Bore/Max Bar Capacity | 2.99/2.55 | 2.99/2.55 |
| Tail Stock/Sub Spindle | SUB SPINDLE | SUB SPINDLE |
| Maximum Cutting Length | 40" | 1,016 mm |
| X-Axis Travel (X1, X2, X3) | 22.83 | 22.83 |
| Z-Axis Travel (Z1, Z2, Z3) | 41.14 | 41.14 |
| Y-Axis Travel (Y1, Y2, Y3) | 6.30 | 6.30 |
| C-Axis Indexing (1, 2) | 360° (0.001°) Both Spindle | 360° (0.001°) Both Spindle |
| Main Spindle Chuck Size | 8" | 203.2 mm |
| Main Spindle Horsepower (CONT. /30 MINS) | 30 | 30 |
| Sub Spindle/2nd Spindle Chuck Size | 8 | 8 |
| Sub Spindle/2nd Spindle Bore Size | 2.99 | 2.99 |
| Sub Spindle/2nd Spindle Speed | 355,000 RPM | 355,000 RPM |
| Sub Spindle/2nd Spindle Horsepower (CONT. /30 MINS) | 25 | 25 |
| Chip Conveyor | Yes | Yes |
| Tool Eye Automatic Front Spindle | Yes | Yes |
| Tool Eye Automatic Second Spindle | Yes | Yes |
| Rapid Traverse, X-Axis | 1496 | 1496 |
| Rapid Traverse, Y-Axis | 1093 | 1093 |
| Rapid Traverse, Z-Axis | 1496 | 1496 |
| Control | CNC (MATRTIX) | CNC (MATRTIX) |
| Dimensions | 160" x 93.0" x 110.2" High | 160" x 93.0" x 110.2" High |
| Weight | 22,660 lbs | 22,660 lbs |
*All specifications are approximations and are subject to
verification. Comes as shown in the images.
Please give us a call if you have any questions before purchasing.
All sales are final.*
Specifications:
Mazatrol Matrix CNC Control
Linear Ways Construction
EIA/ISO Programming
3DCoordinate Conversion
Rigid Tapping
PCMCIA Card Slot
Capacity:
Max Turning Diameter: 26.0″
Max Turning Length: 40.0″
Max Bar Capacity: 2.55″
Max Swing Over Bed: 26.0″
Max Swing with Y-Axis: 19.70″
Max Weight on Main & Sub Spindle: 660 lbs
Travel:
X Axis Travel: 22.83″
Y Axis Travel: 6.30″
Z Axis Travel: 41.14″
W Axis Travel: 41.34″ (Sub Spindle)
B Axis Travel: 225 Degree
C Axis: 360° (0.001°) Both Spindle
X Rapid Traverse Rate: 1496 Inch Per Minute
Y Rapid Traverse Rate: 1093 Inch Per Minute
Z Rapid Traverse Rate: 1496 Inch Per Minute
Spindle:
Main Spindle Nose: A2-8
Sub Spindle Nose: A2-8
Main Spindle Bore: 2.99″
Sub Spindle Bore: 2.99″
Main Spindle Speed: 35 – 5000 RPM
Sub Spindle Speed:35 – 5000 RPM
Main Spindle Motor: 30 HP
Sub Spindle Motor: 25 HP
Milling Head:
Single Station Pendulum Head with 40 ATC
Tool Type: HSK-63 Taper
Max Tool Diameter: 3.54"
Max Tool Length: 11.81"
Spindle Speed: 15-12,000 RPM
Spindle Motor: 25 HP
Spindle 90° Index Time: 0.5 sec
Lower Turret:
Capacity: 9 Stations
Turret Index Time: 0.14 Second
OD Tool Size: 1.00″
General:
Power Source: AC 400V, Three Phase, 50/60 Hz
Power Requirement: 82.6 Kva
Overall Dimensions: 160″ x 93.0″ x 110.2″ High
Weight: 22,660 lbs Approx.
Equipped With
12,000 RPM Pendulum Milling Head
40 Station Tool Magazine
9 Station Lower Turret
Sub Spindle
Servo Controlled Full C-Axis on Both Spindles
Y Axis Capability
8″ Chuck on Main Spindle
8″ Chuck on Sub Spindle
High Pressure Coolant System
Foot Operated Control for Chuck
Chiller Unit
Chip Conveyor