Equipped With
NEW - KENT USA MLX-2060T PRECISION ENGINE LATHE
10HP Spindle Motor - 12 Speeds
3.125" Spindle Through Hole
Solid Full Length Casting Base With Front Loading Chip Tray For Easier Cleaning
Adjustable Over-Load Feed Clutches
Quick Reversal Feed From Apron
Full Length Safety Foot Brake
Spindle Jog Button Control
One Shot Lubrication For Apron, Carriage and Bed Ways
Multi-Position Adjustable Feed Position Stops
Dual Inch/Metric Calibrated Tailstock Quill With knockout Tang; Heavy Duty 2-Speed Tailstock
Dual Inch/Metric Dials With Quick Change Sleeve
SPECIFICATIONS
Swing Over Bedways 20"
Swing Over Cross Slide 14"
Swing Over Gap 27.5"
Gap Length (W/Face Plate) 8"
Bed Width 12"
Distance Between Centers 57"
Spindle Hole 3.125"
Spindle Nose Camlock D1-8
Spindle To Sleeve Taper 1/19.18 - MT5
Spindle Speeds 12 Steps - 26-1500 RPM
Bearing Length On Ways 17.3"
Cross Slide Width 7.25"
Cross Slide Travel 10.6"
Top Slide (Compound) Travel 4.75"
Thread Capacity
Inch (45) 2-72 TPI
Metric (39) 0.2 - 14mm
Modular (18) 0.3 - 3.5M
Diametrical Pitch (21) 8-44 DP
Feeds
Longitudinal 0.0015 - 0.04 IPR
Cross 0.00075 - 0.02 IPR
Tailstock Quick Diameter With Tang 2.3"
Tailstock Quill Travel 5"
Tailstock Quill Taper MT4
Main Motor 10 HP
Coolant Pump Motor 1/8 HP
Approx. Dimensions 115" x 39" x 63"
Approx. Weight 4560 Lbs
