HURCO VM1 Vertical Machining Center, 2006, used. Table: 29" x 14", X/Y/Z Travel: 26"/14"/18", Spindle: 8,000 RPM, 10 hp, ATC: 16 tools. Equipped with ULTI POCKETS, chip auger, USB, floppy drive. Available for immediate purchase.
| TABLE LENGTH | 29" | 736.6 mm |
| TABLE WIDTH | 14" | 355.6 mm |
| TABLE CAPACITY | 750 lb | 340.2 kg |
| X-AXIS TRAVEL | 26" | 660.4 mm |
| Y-AXIS TRAVEL | 14" | 355.6 mm |
| Z-AXIS TRAVEL | 18" | 457.2 mm |
| SPINDLE SPEED | 8,000 RPM | 8,000 RPM |
| SPINDLE MOTOR | 10 hp | 7.5 kW |
| TOOL CAPACITY (ATC) | 16 | 16 |
| RAPID TRAVERSE - X AXIS | 750 in/min. | 19 m/min. |
| CUTTING FEEDRATE | 600 ipm | |
| APPROX MACHINE WEIGHT | 6,500 lb | 2,948.4 kg |
| APPROX MACHINE DIMENSIONS | 75" x 65" x 98" | 75" x 65" x 98" |
ULTI POCKETS
CHIP AUGER
COOLANT SYSTEM
USB / ETHERNET
FLOPPY DRIVE
RAMP/HELICAL ENTRY
ADVANCED VELOCITY CONTROL
GRAPHICS
EXTENDED HDD
EXTENDED MEMORY
10 HP MOTOR, WIRED 3 PHASE, 60 HZ, 220 VOLTS
MACHINE CAME OUT OF SINGLE SHIFT SHOP ENVIRONMENT, ORIGINAL OWNER.
** AVAILABLE FOR IMMEDIATE INSPECTION & PURCHASE
