NEW 2025 SHARP 2680B

SHARP Model 2680B Precision Lathe with 4.5" Spindle Bore, Swing 26", 80" Centers
FEATURES:
 D1-11 Camlock
 4.5” Spindle Bore
 Direct Selection For Inch/Metric Threads
 One Piece Cast Meehanite Bed
 Quick Change Gearbox
 15 HP Motor

www.sharp-industries.com On the Cutting Edge of Manual and CNC Machining Jan. 2026
 12-Speed Gear Head (10-1,000 RPM)
This 2680 engine lathe boasts a 26" swing, 80" centers, and a powerful 15 hp motor. With a spindle speed range of 10-1,000 rpm, it's perfect for precision work. Trust Blackout Equipment, LLC for all your equipment needs. Contact us now!"

SPECIFICATIONS:
 Capacity
• Swing Over Bed 26"
• Swing Over Cross Slide 17.24”
• Center Height 13”
• Swing Over Gap 35”
• Distance Between Centers 80”
 Headstock
• Spindle Nose Type D1-11 camlock
• Spindle Bore 4.5”
• Spindle Speeds (12) 10-1,000 rpm
• Taper of Spindle Bore MT#7
• Taper of Center MT#5
 Threads and Feeds
• Longitudinal Feeds – in/rev (18) 0.0022 - 0.032”
• Cross Feeds – in / rev {#} 0.0026–0.035” {17}
• Inch Threads (#) 2-56 tpi {44}
• Metric and Module Threads {#} 0.5-14mm {24}
• D.P. Threads (36) 4-56 mm
• Leadscrew Pitch, Diameter 4 tpi, 1-1/2”
 Carriage
• Cross Slide Travel 13-3/4”
• Compound Rest Travel 6.2”
• Compound Width 6”
 Bed
• Bed Width 15-3/4”
• Bed Length 120.5”
 Tailstock
• Quill Travel (graduated) 6-1/2”
• Quill Diameter 3”
• Quill Taper MT#5
 General
• Spindle Motor (220V or 440V, 60, 3) 15 hp
• Dimensions 137” x 41” x 52”
• Net Weight (approx.) 6,656 LBS
• Standard Color Gray

STANDARD EQUIPMENT:
• 4-Jaw 16” Chuck
• Coolant System
• 4 Way Tool Post
• Halogen Work Light
• Face Plate 20”
• Steady Rest (4”-11.5”)
• 4-Way Carriage Stop
• Splash Guard
• 16” swing chuck guard, optional 26” swing chuck guard is available
• Tailstock
• Follow Rest ( 1.57” – 6.3”)
• Wired 220V or 440V. Please Specify
• Tool Kit:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver, Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 sets of dead center, Pin for Indicator, and Can of Paint

OPTIONAL ACCESSORIES:
 3 - Jaw Chuck 12” D1-11 (Bison) - 4.05” Bore 803-1239 $ 2,943.00
 3 - Jaw Chuck 16” D1-11 (Bison) - 5.34” Bore 803-1639 $ 5,335.00
 4 - Jaw Chuck 16” D1-11 (Bison) 853-1639 $ 3,207.00
 3 - Jaw Chuck 15” D1-11 (QU) 3J15D11 $ 3,604.00
 4 - Jaw Chuck 16” D1-11 (QU) 4J16D11 $ 2,563.00
 Taper Attachment (Factory order) 991126 -22 $ 3,990.00
 Installation of taper attachment net $ 885.00
 Drill & Arbor (JACOBS) 22/30B-D/A $ 880.00
 Quick Change Tool Holder (Aloris) 7 pcs. CA-2511-7350 $ 2,628.00
 Live Center – MT#5 LC-MT5 $ 371.00
 5C Lever Collet Closer (Atlas) CCD1-11 $ 2,923.00
 5C Collet Set (1/8 to 1/16” x 1/16”) 16 pcs. ACC-5C $ 525.00
 Micrometer Carriage Stop 20C-02 $ 333.00
 Steady Rest 12” (3.15”- 11”) 26B-STEADY12 $ 2,247.00
 Steady Rest 15” (6.7” – 15”) 26C-STEADY15 $ 2,809.00
 Roller Jaws Set (3 pcs) 26C-RJAW $ 1,378.00
 Chuck Guard with limited switch (factory order only) 22 B-04 $ 689.00
 Tool guard with limited switch (factory order only) G 2240 $ 2,459.00
 Lead screw guard (factory order only) LSG-2240 $ 1,738.00
 Guard behind spindle (factory order only) GBS-2240 $ 96.00
 UL (to meet the state of California)/CSA switchboard/UL motor/CSA pump instead of the regular
version (factory order) UL/CSA 2240 $ 2,500.00

www.sharp-industries.com On the Cutting Edge of Manual and CNC Machining Jan. 2026
NOTE: SHARP DOES NOT PROVIDE UL/CSA STICKERS ON THE MACHINES,
BUYERS NEED TO CONTRACT A LOCAL AGENCY TO REVIEW THE ISSUES AND
THEN PUT “COMPLIANCE" STICKERS ON THE MACHINES AFTERWARDS.
*** UL compliance certificate issued by CSA Group net $ 4,860.00

DIGITAL READ-OUT SYSTEMS:
 Fagor 20i D.R.O. FG-2680 $ 4,237.00
 Fagor 40i D.R.O. FG-40i-2680 $ 4,859.00
 Acu-Rite 203S D.R.O. AR-2680 $ 6,174.00
 Newall NMS 800 DRO NWN-2680 $ 4,712.00
Factory Installation - D.R.O. $ 790.00 NET