USED CLEMCO Cms-4

Clemco CMS-4 specifications According to product listings from United Western Denver and data sheets from Specialized Coating Systems, the Clemco CMS-4 includes the following specifications: Sensor and alarm performance Gas detected: Carbon monoxide (CO).Detection method: Sampling by diffusion.Audible alarm: High-decibel alarm.Visual alarm: Flashing lights.Vibratory alarm: Alerts the user to a hazardous condition.Set point: Factory-set at 10 ppm, which is the maximum permissible exposure level (PEL) for Grade-D breathing air in the USA.Accuracy: \(\pm \) 2 ppm.Over-range condition: Indicated by audible, vibratory, and visual alarms.CSA Classification: Class I, Division I, Groups A, B, C, and D hazardous atmospheres. Physical and operational details Dimensions: 2.5" W x 1.7" H x 0.9" D.Net weight: 1.6 oz (0.1 lb).Display: Digital liquid crystal display (LCD).Attachment: Attaches to the inside of the respirator helmet with a Velcro strip.Power source: 3-volt, coin-type lithium battery (CR2450).Operating life: Approximately one year of normal use (3,000 hours).Operating temperature range: -4° to 104° F (-20° to 40° C) for continuous use, according to United Western Denver.Operating humidity range: Up to 85% relative humidity (non-condensing).Calibration: Unit is calibrated with a 25 ppm test gas. A new calibration kit is required for the CMS-4.Approvals: NIOSH-approved for use with Clemco Apollo 20, 60, and 600 respirators. Warnings and alerts Low battery warning: Visual flashing indicator.Dead battery: Indicated by an audible alarm.System failure: Indicated by an audible alarm. Replacement parts and accessories Replacement parts and calibration kits for the Clemco CMS-4 are available from suppliers such as Sandblasting Machines and Woodward Equipment. Replacement sensor: Item #29768.Charcoal filter: Item #25564.Hydrophobic filter: Item #29868.Service kit: Item #29870.Calibration kit: Item #29767.Test gas: 25 ppm CO Test Gas (Item #25573) and Impurity Free Test Gas (Item #11132).