NEW TITAN INTERNATIONAL SALES TITAN i40C (10ATC)

Built in filtration system with deionizing resin system
Small footprint to optimize floor space
Stainless work surface for mounting tooling
Automatic electrode compensation
Pre-defined cutting technology database

Travels
X, Y Axis: 16.0" x 12.0"
Z Axis: 14.0"
W Axis: 14.0"

Table
Worktable Size (X/Y): 26.0" x 16.0"
Work Tank Size (X/Y): 39.0" x 24.0"
Max Heigh of Workpiece: 14.0" (Optional accessory to 16.0")

Tooling Specs
Electrode Diameter: Ø .008" ~ .118" (Optional accessory from .118"-.236" or .004"-.008")
Max Length of Electrode: 16.0"

Generator Specifications
Type: Input power AC / Discharge output DC
Switching: High Current FET
Amperage: 50A
Amperage Setting: 3 steps
On-time Setting: 7 steps
Off-time Setting: 5 steps
Servo Feedrate: 1200mm/min
Meters: Voltmeter
*Voltage regulator recommended for environments experiencing fluctuations +/- 10% of rec. voltage

Utilities/Enviromental
Input Power: 3 Phase, 2080VAC, 60Hz, 3.5KVA
Ambient Temperature: 55-75 Degrees Fahrenheit
Relative Humidity: 40-50%

**INCLUDES 10 STATION AUTOMATIC ELECTRODE CHANGER*

MACHINE RIDIGITY
• Cast Iron Frame FC35 heat treated and stretched ensures long term accuracy and high rigidity
• Stainless Worktable heat treated, maximizes precision and excellent electrical conductor
• Stainless Steel Rail System eliminates the need for expensive fixturing
• Isolated Cabinet Design completely separates internal plumbing from electrical components
• Direct motor couplers to servo system compensate for axial deviation
• Glass Scale Feedback on X, Y Axis enables closed loop feedback system using glass scales

EXTERNAL FILTRATION SYSTEM
• 30 gallon closed loop filtration- clean / dirty sides
• 20” pleated 5 micron filter, pressurized housing
• Connections for resin bottle (optional 1035 bottle)

MACHINE TOOLING (STANDARD)
• M8 stainless steel inserts / 2 workpiece clamps
• Stainless steel tooling rails with T slots
• Stainless steel tooling cross rails for fixture mounting
• 10pc 1mm electrodes, 1pc 1mm guide, 5pc 1mm seals included
• Keyless drill chuck

AUTOMATIC ELECTRODE CHANGER (OPTIONAL)
• Air magazine system proven, stable, repeatable, low maintenance tool changer
• Depth probing allows for mid-hole tool changes without losing depth accuracy
• Includes 10 chucks for each position (no other tooling required to operate)

6MM SPINDLE TOOLING SET (OPTIONAL)
• Increases maximum electrode capacity from 3mm to 6mm
• Machines without ATC option; includes ER16 collet chuck and ER16 Collet set (3-6mm)
• Machines with ATC option; includes 2pc ER16 collets (3-6mm) with arbors
• Stainless Steel ER16 collets sold separately

SOFTWARE FEATURES
• Embedded Windows CE operating system allows for controller flexibility and HMI customization
• Standard G code programming G and M code programming; NC and DXF file reading function
• Automatic electrode compensation offers automatic reset and depth calculation of Z axis
• Soft start feature reduces burr formation by changing amperage levels during the burn process
• Cutting technology storage allows for user defined setting management and sample test bank
• Programmable work piece pickup ID, OD, cylindrical and shapes
• Depth control / blind hole capabilities offer automatic probing of hole depth
• Multiple work piece setup allows for simultaneous programming and machining
• On screen editing offers point and click programming options with hole elimination
• Dry run function with single block option
• Drilling timer both cycle time and program time
• Program input by USB, or Ethernet