USED 2019 DMG MORI CTX BETA 1250

Specifications (subject to buyer verification):
Headstock LH
Clamping Chuck Diameter: 7.87/9.84/12.4”
Spindle Nose Diameter: 6.69”
Spindle Bore: 3.425”
Spindle Diameter Front Bearing: 5.12”
Drive Power: 33.51/42.91 HP
Torque: 206.5/265.5 lb*ft
Speed Range: 0 – 5,000 RPM

Headstock RH
Clamping Chuck Diameter: 7.87/9.84/12.4”
Spindle Nose Diameter: 6.69”
Spindle Bore: 3.425”
Spindle Diameter Front Bearing: 5.12”
Drive Power: 33.51/42.91 HP
Torque: 206.5/265.5 lb*ft
Speed Range: 0 – 5,000 RPM

C-Axis
Interpolation Range: ±99999.999º
Input Precision: 0.001º = 3.6"
Maximum Speed of C-Axis (Rapid Traverse): 2,000 RPM

Traverse Paths
Slide I, X-Axis, Transverse: 10.63”
Slide I Y-Axis, Vertical: ±2.36”
Slide I, Z-Axis, Longitudinal: 46.06”
Slide II, X-Axis, Transverse: 7.67”
Slide II, Z-Axis, Longitudinal: 47.24”
Slide III, Z-Axis, Longitudinal: 47.24”

Tool Carrier
Number of Tool Stations: 2 x 12 Tool register according to DIN 69 880 (Part 11)
Cylindrical Shank Diameter: 1.57” with precision reception (Trifix)

Tool Drive Tool Carrier I
Position of Tool Spindles: 12 x 30º
Speed Range (Directly Programmable): 0 – 4,000 RPM
Maximum Motor Rating in S6 Operation (40% Duty Cycle): 15.14 HP
Maximum Torque in S6 Operation (40% Duty Cycle): 26.55 ft*lb

Tool drive tool carrier II
Position of Tool Spindles: 12 x 30º
Speed Range (Directly Programmable): 0 – 4,000 RPM
Maximum Motor Rating in S6 Operation (40% Duty Cycle): 15.14 HP
Maximum Torque in S6 Operation (40% Duty Cycle): 26.55 ft*lb

Voltage: 400V
Weight: 32,650 lbs
Dimensions: 236” x 96” x 106”

Equipped With (subject to buyer verification):
CELOS with Siemens 840D sl Operate
Chip Conveyor
Automatic Door