NEW CLAUSING COLCHESTER 8027J

Specifications:
• Machine Style..........Engine Lathe
• Spindle Speed Control..........Geared Head
• Spindle (Hp)..........3
• Swing Over Bed (inch)..........13
• Swing Over Cross slide (inch)..........8.26
• Swing in Gap (inch)..........18.8
• Distance Between Centers (inch)..........40
• Bed Width (inch)..........8
• Spindle Bore (inch)..........1.5
• Spindle Nose (camlock)..........D1-4
• Spindle Nose Taper..........3 MT
• Number of Spindle Speeds..........12
• Spindle Speed RPM Range..........40-2500
• Cross Slide Travel (inch)..........7.5
• Width of Cross Slide (inch)..........5.5
• Top Slide Travel (compound) (inch)..........3.63
• Tailstock Quill Diameter (inch)..........1.63
• Tailstock Quill Travel (inch)..........4.38
• Tailstock Quill Taper..........3 MT
• Longitudinal Feed Range (in/rev)..........0.001 – 0.080
• Cross Feed Range (in/rev)..........0.0005 – 0.040
• Number of Inch Pitches..........35
• Range of Inch Pitches..........2 – 56
• Number of Metric Pitches..........39
• Range of Metric Pitches..........0.2 – 14
• Number of Diametral Pitches..........18
• Range of Diametral Pitches..........8 – 56
• Number of Module Pitches..........18
• Range of Module Pitches..........0.3 – 3.5
• Coolant System..........Yes
• Voltage Required..........(220) 230/460
• Phase..........(1) 3
• Machine Foot Print (LxWxH) (inch)..........82 x 58 x 37
• Machine Weight (lbs.)..........1,960

Machine Features:
• 40” between center distance
• 13” Swing over bed
• 12 headstock gear ranges from 40 to 2500 RPM for a variety of work at top efficiency
• Headstock shafts are splined and turn on anti-friction bearings with the headstock gears hardened and ground.
• Forced lubrication system the spindle bearings, gears and shafts are lubricated by a forced lubrication system
• A broad range of feed and thread selections are available by using three selector levers and an 8 position rotary dial
• Easily accessible chip tray (door)
• All bedways are induction hardened and precision ground
• Precision tapered roller spindle bearings
• Cross slide runs along a dovetail guide
• Bed wipers and apron mounted one-shot lubrication pump
• Cast iron plinths with full length splash guard and traveling chip guard
• Foot spindle brake
• Equipped with chuck guard, full splash guard, and leadscrew cover
• Leadscrew reversing box for faster thread cutting – reversal of the leadscrew with the spindle running at low speed
• Extra wide heavy-duty cast iron bed with triangular webs for exceptional torsional stiffness and excellent chip clearance
• Anti-friction carriage ways with low-friction “Moglice” PTFE material fitted between the saddle and bed for minimal bedwear and increased machine life
• Cast iron base provides the maximum support for the bed combined with sloping top surfaces to prevent the accumulation of coolant
• Heavy duty tailstock for excellent rigidity – with extra heavy-duty quill
• A one year warranty backed by Clausing Service Center dedicated to support our customers with parts and service