NEW 2025 KAO MING KMC-325GM
Description
Discover precision with the new 2025 KAO MING KMC-325GM Gantry Machining Center. Featuring a 3000x2200 mm table, 15,000 RPM spindle, 32 ATC, advanced thermal control, and a dual motor drive, ideal for aviation and die mold industries. Upgrade for enhanced precision.
Specifications
| X | 3,000 mm | 118.11" |
|---|---|---|
| Y | 2,500 mm | 98.425" |
| Z | 1,000 mm | 39.37" |
| RPM | 15,000 RPM | 15,000 RPM |
| # ATC | 32 | 32 |
| Table-W | 3,000 mm | 118.11" |
| Table-L | 2,200 mm | 86.614" |
KMC-325GM
Gantry Type 5 Axis Machining Center
X axis travel: 3000 mm
Y axis travel: 2500 mm
Z axis travel: 1000 mm
Table size: 3000 x 2200 mm
Max. table load: 3 ton/m2 ~ 557lb/ sq. foot
Spindle
Spindle speed: 15000rpm
Feed rate(X, Y, Z): 32,32,24m/min
Controller: Siemens, Heidenhain
Box-in-Box design
Rigidity ^30%, Thermal symmetry
Dual motor drive
high speed, high precision
Suitable for Aviation & Die mold Industry
Combine Chip Slot and Cast design
Rigidity ^ & prevent water leak
4 THK Roller Linear Ways for 3 axis
3 Axis Coolant System
Prevent 80% thermal growth
Enhance machine accuracy
Inner cooled ballscrew
Coolant system in bearing seat
Motor board with cooling circuit
Standard: 32 ATC / Set
Chain Type Tool Magazine
No need to tool change arm,avoid vibration
A-axis swiveling angle: +/- 105 Degrees
Motor torque(S1/Smax): 382/575 Nm
Clamping torque at PO/Pmax: 1200/2160 Nm
C-axis swiveling angle: +/- 200 Degrees
Motor torque(S1/Smax): 810/1100 Nm
Clamping torque at Po/Pmax: 930/1680 Nm
Kessler Small 2 Axis Swiveling Head
Spindle speed: 15000 rpm(30000 upgrade available)