DMG Mori NTX-2000SZM/1500 – 2014

DMG MORI Seiki NTX2000SZM/1500

Maximum workpiece swing diameter mm (in.) 660 (25.9)

Swing over cross slide:

– Standard mm (in.) 660 (25.9)

– Turret 2 mm (in.) 300 (11.8)

Maximum turning diameter:

– Standard mm (in.) 610 (24.0)

– B-axis 90 mm (in.) 660 (25.9)

– Turret 2 mm (in.) 274 (10.7)

Maximum turning length mm (in.) 1,540 (60.6)
Travel
X-axis mm (in.) 495 <470+25>

(19.5 <18.5+1.0>)

Y-axis mm (in.) ?125 (?4.9)

Z-axis mm (in.) 1,560 (61.4) +215 (8.5)

B-axis 120

X2-axis mm (in.) 160 (6.3)

Z2-axis mm (in.) 1,402 (55.2)
Spindle 1
Maximum spindle speed:

– Standard min-1 5,000

– For 80 mm (3.1 in.) bar work capacity specifications min-1 [4,000]

Number of spindle speed ranges 1

Type of spindle nose:

– Standard A2-6

– For 80 mm (3.1 in.) bar work capacity specifications [A2-8]

Through-spindle hole diameter:

– Standard mm (in.) 73 (2.9)

Minimum spindle indexing increment 0.0001

Spindle bearing inner diameter:

– Standard mm (in.) 120 (4.7)

– For 80 mm (?3.1 in.) bar work capacity specifications mm (in.) [140 (?5.5)]

Spindle torque <15%ED/30 min/cont>:

– Standard Nm (ftlbf) 230/178/159

(169.6/131.3/117.3)

– High-torque Nm (ftlbf) [358/231/214

(264.0/170.4/157.8)]
Spindle 2
Maximum spindle speed min-1 5,000

Number of spindle speed ranges 1

Type of spindle nose A2-6

Through-spindle hole diameter mm (in.) 73 (2.9)

Minimum spindle indexing increment 0.0001

Spindle bearing inner diameter mm (in.) ?120 (?4.7)

Spindle torque <15%ED/30 min/cont> Nm (ftlbf) 230/178/159

(169.6/131.3/117.3)

Tool spindle
Number of tool stations 1

Minimum B-axis indexing increment 0.0001

Maximum tool spindle speed min-1 12,000

Taper hole of rotary tool spindle Capto C6 [BT40]

[CAT40] [HSK-A63]

[KM-63]

Type of retention knob DMG MORI SEIKI 90
Inner diameter of rotary tool spindle bearing mm (in.) 70 (2.7)

Tool storage capacity 38 [76]

Maximum tool diameter mm (in.) 70 (2.7)

Maximum tool diameter mm (in.) 125 (4.9)

Maximum tool length mm (in.) 300 (11.8)

Maximum tool mass kg (lb.) 8 (17.6) [10 (22)]

Tool changing time sec 1.25

Spindle torque <10%ED/cont> Nm (ftlbf) 120/44 (88.5/32.5)
Turret 2
Number of tool stations 10

Turret Indexing time <1-station> sec 0.19

Shank height for square tool mm (in.) 20 (0.8)

Diameter of boring bar shank part mm (in.) Max. 32 (1.2)

Live tooling on turret
Feedrate
Rapid traverse rate:

– X-axis mm/min

(ipm) 40,000 (1,574.8)

– Y-axis mm/min

(ipm) 40,000 (1,574.8)

– Z-axis mm/min

(ipm) 40,000 (1,574.8)

– X2-axis mm/min

(ipm) 30,000 (1,181.1)

– Z2-axis mm/min

(ipm) 38,000 (1,496.1)

– A-axis mm/min

(ipm) 30,000 (1,181.1)

Motors
Spindle 1 drive motor <30 min/cont> kW (HP) 22/18.5 (30/24.7)

Spindle 2 drive motor <30 min/cont> kW (HP) 22/18.5 (30/24.7)

Tool spindle drive motor <10 min/cont> kW (HP) 18.5/11 (24.7/15)
Power Sources
Electrical power supply kVA 79.9

Compressed air supply MPa (psi), L/min (gpm) 0.5 (72.5), 650 (171.6)
Tank Capacity
Coolant tank capacity L (gal.) 675 (178.2)
Machine Size
Machine height mm (in.) 2,621 (103.2)

Floor space mm (in.) 4,080 x 2,980

(160.6 x 117.3)

Mass of machine:

– Tool storage capacity: 38 tools kg (lb.) 15,270 (33,594)

– Tool storage capacity: 76 tools kg (lb.) [15,780 (34,716)]
Equipped With

Fanuc 31iB5 CNC control

Main and Sub Spindle

Milling Spindle 12,000 RPM

Lower turret with Live tooling

coolant system

chip conveyor

(2) Kitagawa N08 Chucks (Non Thru)

**Note: This machine is equipped with Non-Through Hole Chuck Packages