NEW Hyundai HD3100MA

SPECIFICATIONS
CAPACITY:
Swing over bed Ø29.5" (Ø750mm)
Swing over carriage Ø19.7" (Ø500mm)
Max. turning diameter Ø16.5" (Ø 420mm)
Max. turning length 29.1" (740mm)
Bar Capacity Ø3.2" (Ø81mm)
SPINDLE:
Chuck size 10"
Spindle bore Ø3.6" (Ø91mm)
Spindle speed 3,500 rpm
Spindle nose A2-8
A.C. Spindle Motor (S3 25%) 35 HP (26 kW)
Max. spindle torque (S3 25%) 541.4 lbf.ft (734 N.m)
TRAVEL:
X / Z axis travel 10.4" / 32.7" (265 / 830mm)
X / Z axis rapid traverse rate 945 / 1,181 IPM (24 / 30m/min)
X / Z axis ball screw diameter Ø1.26" / Ø1.57" (Ø32 / Ø40mm)
X / Z axis guideway span 14.17" / 17.32" (360 / 440mm)
TURRET (BMT65P):
Number of tools 12
Turning tool shank size □1" (□25mm)
Boring bar diameter Ø2" (Ø50mm)
Turret index time (1 step) 0.15 sec
Turret clamping force 13,576 lbf (6,158 kgf)
Live Tool Motor Power / Torque (30min) 7.4 HP (5.5 kW) / 51.6 lbf.ft (70 N.m)
[10.1 HP (7.5 kW) / 70.4 lbf.ft (95.5 N.m) (5min)]
Milling Tool Speed 5,000 RPM [5,000 RPM]
PROGRAMMABLE TAIL STOCK (Tow-along type):
Tailstock quill diameter Ø3.94" (Ø100mm)
Tailstock quill stroke 4.72" (120mm)
Tailstock body stroke 32.7" (830mm)
Tailstock spindle taper MT #5
Max. tailstock quill thrust 2,180 lbf (989 kgf)
COOLANT and HYDRAULIC SYSTEM:
Coolant tank capacity 52.8 gal (200 liter)
Hydraulic tank capacity and required oil 7.9 gal (30 liter) / VG32 or CB32
Lubrication tank capacity and required oil 0.5 gal (1.8 liter) / G68
GENERAL:
Machine Height 72.8" (1,850 mm)
Floor Space (L) with side chip conveyor 188.4" (4,785mm)
Floor Space (W) 70.9" (1,800 mm)
Machine weight 13,228 lbs (6,000kg)
Power required 27 kVA / 71 amp @ 220V
Voltage required 205 - 235 Volts / 3 Phase
Specifications are subject to change for improvement without notice.