USED 2008 MURATEC MD120G

4 Axis, Twin Spindle, Fanuc 31iT, With its dual spindles and automated part turnaround system, the MD120G delivers a multitude of options to meet distinct requirements and configurations. This 8-inch twin spindle automated turning center excels with its advanced live tooling functionalities, encompassing both milling and drilling capabilities.

Muratec MD-120G CNC Live Tool C-Axis Milling Twin Spindle (2008)

Main Specifications:

Distance Between Spindles: 13.39"

Max. Swing: 11.61"

Standard Chuck Size: 8"

Turning Diameters: 4.72" Nominal, 9.440"
Max.
Turning Lengths: 3.150" Nominal, 3.94" Max.

Number of Turret Stations: 8

X-Axis: 5.12" Stroke, 945 IPM Traverse Rate

Z-Axis: 5.71" Stroke, 945 IPM Traverse Rate C-Axis Milling & Drilling Feature

Rapid Traverse Rate (X & Z Axis): 78.78 FPM

Spindle Speeds: 45 - 4500 RPM

Spindle Noses: A2-5, Bore 1.850"

Spindle Drive Motors: 15 HP

Tool Shank Size: 0.75" Square, 1.570" Round

Approx. Weight w/Loader: 11,800 lbs.

Floor Space: L 139.37" x w 136.22"

Standard Loader Specifications:

X-Axis Stroke: L7.87"/R63", Max. Speed: 492 FPM

Y-Axis Stroke: 19.09", Max. Speed: 361 FPM

Z-Axis Stroke: 6.1", Max. Speed: 115 FPM

a-Axis: 180 Deg., Max. Speed: 0.6 sec./180 Deg.

Load/Unload Grippers: Outer Diameter: 3.54", Jaw Stroke: 1.18"

Max. Work piece Weight: 8 lbs x 2

Fanuc 31iT CNC Control, (1) Overhead Gantry Loaders
Pallet Stocker Feeder Table (2) 6" 3-Jaw Chucks w/ Air Blast- Coolant w/Part Confirmation
Coolant Tank and Pump, All Book & Manuals, A2-5 Spindle Nose M-Code Air Blast and Coolant Blast Through Chucking Center

Part Work Location Confirmation,

Input Part Re-Chucking Station

LNS - Turbo Rear Discharge Magnetic Chip Conveyor

(2) 6" 3-Jaw Chucks Top Tooling Part Specific Not Included

Muratec Tool Holders Live & Status Included